Flows/Scans/Calls Flashcards
After Preflight checklist?
Start eMB calculation
Capt - “Before Start Checklist to the line”
- FO - Set fuel panel
- Centre fuel tank pumps ON if more than 453kg
- FO - Read Before Start Checklist
“Before Taxi Procedure”
- Generators - ON
- Probe Heat - ON
- PACK switches - AUTO
- Isolation valve - AUTO
- APU Bleed - OFF
- Engine Start Switches - CONT
- Anti-Ice - AS REQUIRED
- Capt - “Set Flaps”
- FO - “Flaps ____ Selected”
- Flight Controls
- Blank Lower DU
- Recall
- “Before Taxi Checklist”
Prior to taxi
- APU switch OFF
- Taxi light - ON
- Turnoff lights - ON
Cleared to line up
- Centre tank fuel pumps - OFF if less than 1,000kg
- No smoking sign
- External lights
- Strobes
- Transponder
CNEST
“Flaps UP, no lights”
(Normal T/O)
- Pressurisation (Verify Engine Bleeds & Packs Operating)
- Engine start switches - As required
- Autobrake switch - OFF
- Landing Gear Lever - OFF
PEAL
PF - “Set Standard”
- PM - “Standard cross-checked, passing FL ____ now”
- PF - “Checked”
PF - “Set QNH”
- PM - “QNH cross-checked, passing altitude ____ now”
- PF - “Checked”
Passing 10,000ft
- Verify cabin pressurisation
- Lights OFF
- “Fasten Belts Signs Auto”
OR
- Fuel
- Lights
- Altimeters
- APU
- Pressurisation
- Seat belt signs
FLAAPS
After Landing Flow
- APU - Start as needed
- PROBE HEAT switches - AUTO / OFF
- Lights - As required
- ENGINE START switches - As required
- Radar - Wx Radar to TEST / OFF
- Autobrakes - OFF
- Flaps - UP (or not less than 15 if contamination suspected)
- Transponder
- Stab Trim - Green Band (5 units if landing in icing conditions)
APLERAFTS
Final Approach Fix or OM
Altitude check
- PM - “OUTER MARKER, FIX NAME or DME DISTANCE”
- PF - “XXXX FEET”
- PM - “ALTITUDE CHECKED (or difference)”
RAD ALT alive call
- PM - “RAD ALT alive, QNH ____”
- PF - “QNH ____”
At 1,000ft ARTE
- PM - “1,000ft”
- PF - “Missed approach altitude/FL set”
Shutdown flow (FO)
After engines shutdown
* Seatbelt sign - OFF
* ANTI COLLISION LIGHT - OFF Below 10% N1
* Fuel pumps - As Required
* Wing / Engine Anti Ice - As required
* Hydraulic panel - As required
* Packs - As required
* Isolation valve - OPEN
* APU Bleed - As required
* External lights - As required
* FD switches - OFF
* MCP Speed - 100kts
* Transponder - Set 2000, then OFF
* Mobile devices - ON
Lights entering the runway
Strobes - ON