Flows/Calls Flashcards
Before start checklist below the line
- PEDs : Airplane mode
- Doors/Windows : Closed And Locked
- ATC : clearance for pushback
Then :
- RED BCN ON
- HYD PUMP 3A ON
- Transponder TA/RA
Then read the checklist
Before Take-off
- ATTND CALL Press twice
- Brakes T° checked
- T/O CONFIG button pressed
Line-up
- Lights :
- Taxi Lights ON
- INSP Lights ON at night
- STROBE ON
- A/T Armed (call)
- Confirm RWY
+ LDG Lights when clearance received
T/O calls
TAKEOFF, CHECK THRUST
THRUST CHECKED
80 KNOTS
CHECKED
V1 (LSP removes hand)
ROTATE
POSITIVE RATE
GEAR UP
GEAR UP
400ft AFE : HDG MODE or NAV MODE
1000ft AFE : FLCH MODE or VNAV MODE, A/P ON
Flaps on schedule
10,000ft UP flow
- FSTN BELTS As Req’d (or ATTND CALL twice)
- Lights OFF (Taxi, Ldg, Insp, Logo)
- Pressurization Check
- 121.5 on COM2
Cruise
- Check RVSM if above FL290
- Check fuel
- Start to prep APPR on short flights
10,000ft DOWN (at « Approach Checklist » call)
- Lights ON
Ldg Lights
Taxi SIDE Lights
INSP and LOGO lights (at night) - FSTN BELTS ON
- NAVaids or RAIM Checked
Gear Down, Flaps 3 on APPR?
GEAR DOWN
SPEED CHECK, FLAPS
ATTND CALL twice
Cleared to land?
Taxi NOSE On
After landing flow
- Lights OFF
- Ldg lights
- Strobe
- Taxi SIDE
- INSP - Contact GND ATC
Call for After Ldg Flow
- Flaps 0
- Trim to 4.0 UP
- MFD to Status page
- ENG A/I if required
- Call After landing flow complete
Shutdown flow (LSP)
- Throttle IDLE
- Parking Brake SET
- FSTN BELTS OFF
- Electrical Check on APU
- START/STOP Selectors OFF
Then (OFF on N1 gauges) :
- HYD 3A OFF
- RED BCN OFF
Shutdown flow (RSP)
- Transponder STBY/0000
- NavAids RESET
- Post Flight Report SEND