Flows Flashcards
After Rudder Pedals - Adjust
FFAACR
BBB
AF
F - Fuel Slip F - FMC A - ACARS A - AeroDATA C - Clerance R - Route Check
B - Brief Conduct of Flight
B - Brief Jump-seater and FAs
B - Brief Taxi and Takeoff
A - AeroDATA
F - FMC
Final Items (After ANTI COLLISION LIGHT - ON)
- Verify Flight Deck door locked
- Transponder - TA/RA
- Verify window - Closed & Locked
After an engine is started (“After Start Checklist” called)
- Flaps - Set as required
- GEN - ON
- PROBE HEAT - ON
- ENG/Wing Anti-Ice - As required
- HYD PUMPS - ON
- TRIM AIR - ON
- PACKS - ON
- ISO VLV - As required
- APU Bleed - As required
- RECALL
- APU - As required
- Start Lever - IDLE
- Do AFTER START checklist
1 - 2 Mins Prior to T/O
“Flight Attendants be seated for takeoff.”
FA chime
- ENG START switches - CONT
2. WX (or TERR) map - ON (FO side only)
Cleared onto runway
POSITION light - STROBE & STEADY
Prior to TOD
“AABBBBC” - ATIS Aerodata Brakes Build (“box”) Bug Brief Checklist
After AABBBBC
Set EXR and TERR on EFIS as desired
“CRAPR” - Company (via ACARS) Radar Anti-ice Pressurization Recall
After CRAPR (PF - Calls for…)
PF - “Descent Checklist”
After “Descent Checklist” Call (PM’s ACTION?)
Do DESCENT CHECKLIST then…
…“Descent Checklist Complete”
Thru FL180 (PF - Calls for…)
PF - “Transition Level, Altimeters __.__”
“Transition Level, Altimeters __.__”
PM - “Flight Attendants, Approach Check”, “Transition Level, Altimeters __.__”
“Flight Attendants, Approach Check”, “Transition Level, Altimeters __.__”
PF - “Approach Checklist”
“Approach Checklist”
PM - Set engine start switches to CONT
Do APPROACH CHECKLIST then…
…“Approach Checklist Complete”
“Flaps up, After landing Checklist”
- Flaps - UP
- POSITION light - STEADY
- ENG START switches - OFF
- Wx Radar - OFF (CA/FO)
- Xpdr - ALT ON/XPNDR
- STAB TRIM - 4
- APU - Start (when required)
- APU GEN switches - ON (after APU start)
- Do AFTER LANDING checklist
