Flight Instruments Flashcards

1
Q

The air data modules convert pneumatic pressure to electrical signals and send these data to the _____________.

A

ADIRUs

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

The _____ provide inertial position and track data to the FMC as well as attitude, altitude, and airspeed data to the displays.

A

ADIRUs

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

If a _____ fails, automatic display switching ensures critical information remains available to the pilots at all times.

A

DU

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

If the airspeed is manually selected in the IAS/MACH window, where does it appear on the flight instrument display?

A

All answers are correct
() Above the PFD Airspeed Indicator
() The magenta Speed Bug on the PFD Airspeed Indicator

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

The tip of the Speed Trend Vector (green) on the PFD Airspeed Indicator shows predicted airspeed in the next ______ seconds.

A

10

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

If the current airspeed decreases into the minimum speed amber bar, the airspeed readout box turns _________________________.

A

amber and flashes for 10 seconds

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

Current Mach is digitally displayed below the airspeed tape when the current Mach number is greater than ________.

A

0.40 Mach

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

On the PFD Airspeed Indicator, the bottom of the Maximum Speed (red and black) bar indicates the maximum speed as limited by __________.

A

() all answers are correct
() VMO/MMO
() Landing Gear or Flap placard speed

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

The Maximum Maneuver Speed/High Speed Buffet (amber) bar is displayed on the PFD Airspeed Indicator _______________.

A

when flaps are up

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

The Flaps Maneuvering Speeds (green) are displayed on the PFD Airspeed Indicator after the __________ is entered in the CDU.

A

gross weight

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

The Flaps Maneuvering Speeds (green) UP bug is not displayed on the PFD Airspeed Indicator __________.

A

above approximately 20,000 feet altitude

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

On the PFD Airspeed Indicator, the V2+15 (white) bug is displayed for takeoff, and removed at __________.

A

first flap retraction

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

On the PFD Airspeed Indicator, an Amber NO VSPD displayed on the ground indicates __________ on the CDU.

A

V1 and VR are not selected

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

On the PFD Airspeed Indicator, the Minimum Maneuver Speed (amber) bar is inhibited on takeoff until _______________.

A

first flap retraction

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

On the PFD Airspeed Indicator, the top of the Minimum Speed (red and black) bar is the speed at which _______________.

A

stick shaker occurs

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

Shortly after takeoff, when flaps are not up, the bottom of the Maximum Maneuvering Speed (amber) bar indicates _______________.

A

flap limit placard speed for the next normal flap setting

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

On the PFD Airspeed Indicator, the VREF+20 (white) bug is automatically displayed with selection of _______.

A

VREF

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q

The Landing Reference Speed (green) is indicated as _______ on the PFD Airspeed Indicator.

A

REF

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
19
Q

The altitude set in the MCP altitude window is displayed on the PFD Altitude Indicator as ____________.

A

Selected Altitude Bug (magenta)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q

When MTRS is selected on the EFIS control panel, __________________ is displayed on the PFD Altitude Indicator

A

Metric Selected Altitude Readout

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
21
Q

On the PFD Altitude Indicator, the Selected Altitude (magenta) box appears _________ during an altitude alert.

A

white

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
22
Q

On the PFD Altitude Indicator, the Current Altitude box is highlighted in amber and flashes to denote _______________.

A

an altitude deviation

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
23
Q

On the PFD Barometric Indicator, the Barometric Settings Box is displayed green unless a numeric is set and the aircraft _________________ where the box turns amber.

A

is climbing above transition altitude

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
24
Q

On the PFD Barometric Indicator, when the Barometric Standard (STD) is selected, a barometric setting ______ be preselected.

A

can

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
25
Q

On the PFD Vertical Speed Indicator, the Selected Vertical Speed Bug (magenta) indicates __________________.

A

the speed selected in the MCP vertical speed window with V/S pitch mode engaged

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
26
Q

On the PFD Vertical Speed Indicator, the Vertical Speed (white), is located __________________.

A

above the vertical speed indication when climbing and below when descending

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
27
Q

On the PFD Attitude Indicator, the Bank Pointer indicates bank angle. When the bank angle is ____ degrees or greater the Bank Pointer fills and turns amber.

A

35

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
28
Q

Slip/Skid indication is located ____________________, and fills white with full scale deflection.

A

beneath the bank pointer on the attitude indicator

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
29
Q

The VNAV Speed Band indicates speed range for VNAV path. _________ is the speed at which VNAV changes from VANV PTH to VNAV SPD.

A

The upper limit speed

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
30
Q

The pitch scale on the Attitude Indicator is white and displayed in ___ degree increments.

A

2.5

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
31
Q

The largest scale indicated on the Attitude Indicator for Bank Scale is ____ degrees.

A

60

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
32
Q

The Aircraft Symbol on the Attitude Indicator indicates aircraft attitude relative to __________.

A

the horizon

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
33
Q

The Flight Director Bars on the PFD indicate steering commands and are ________ in color.

A

magenta

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
34
Q

The Flight Path Vector (FPV) displays ____________ when selected on the EFIS control.

A

() all answers are correct
() flight path angle
() drift

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
35
Q

The Radio Altitude is displayed at radio altitudes below ______ AGL, and turns ______ when below selected radio altitude minimums.

A

2500; amber

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
36
Q

Anticipation cues are displayed next to Attitude Indicator as __________________ and display valid approach course deviation (example: LOC/GS deviation) while the corresponding NPS (magenta symbol) deviation scales and pointers are being displayed.

A

white unfilled diamonds

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
37
Q

The Lateral Actual Navigation Performance (ANP) Bars are displayed below the attitude indicator. The Lateral ANP bars can be displayed _____________.

A

in all phases of flight

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
38
Q

On PFD Instrument Landing System Indications, the approach reference located above to the PFD, turns amber when _____________.

A

() all answers are correct
() the ILS tuned frequencies disagree
() the approach courses in the MCP disagree

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
39
Q

On PFD Instrument Landing System Indications, the localizer pointer fills in solid ______ when within 2 ½ dots from center.

A

magenta

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
40
Q

On PFD Instrument Landing System Indications, the glideslope pointer is in view when ____________________.

A

the glideslope signal is received

41
Q

On PFD Landing Altitude/Minimums Indications, the BARO Minimums Pointer (green) _______________ when the aircraft descends below selected minimum altitude.

A

turns amber

42
Q

On PFD Landing Altitude/Minimums Indications, the amber crosshatched area indicates ___________________.

A

FMC landing altitude for destination

43
Q

On PFD Landing Altitude/Minimums Indications, the Minimums Reference/Altitude (green) ___________ and flashes for 3 seconds when the aircraft descends below selected minimum altitude.

A

turns amber

44
Q

On PFD Landing Altitude/Minimums Indications, the Landing Altitude Reference Bar indicates amber when height above touchdown is __________.

A

0 to 500 feet above landing altitude

45
Q

On the PFD, the rising runway is displayed when the localizer signal is usable, and ____________.

A

the radio altitude is less than 2500 feet

46
Q

On the PFD, ____________ replace the appropriate display to indicate system failure.

A

failure flags

47
Q

Two ________receive data from sensors and aircraft systems and supply data to the DUs

A

Display Electronic Units (DEUs)

48
Q

If a Display Unit (DU) fails, _____________ ensures critical information remains available to the pilots are all times.

A

automatic switching

49
Q

The instrument source select switches are located on the overhead panel. Placing the Display Source Select Switch to ALL ON 1, provides a means of manually switching ________________ as the source of information for all six display units.

A

to a single DEU

50
Q

The instrument source select switches are located on the aft overhead panel. Placing the Control Panel Select Switch to BOTH ON 1, provides a means of manually switching the Captain’s and First Officers displays ________________.

A

to a single EFIS Control Panel

51
Q

On the Display Select Panels, placing the MAIN PANEL DUs Selector to OUTBD PFD, displays the ___________ on the outer display unit and blanks the _________ display unit.

A

PFD format; inboard

52
Q

On the Display Select Panels, placing the MAIN PANEL DUs Selector to INBD ENG PRI, displays the ___________ on the outer display unit and displays _________ on the inboard display

A

PFD format; the engine and systems

53
Q

On the Display Select Panels, placing the MAIN PANEL DUs Selector to INBD PFD, displays the ___________ on the inboard display unit and blanks the _________ display unit.

A

PFD format; outboard

54
Q

On the Display Select Panels, placing the Lower DU Selector to ENG PRI, displays __________________on the lower display and blanks the ________display unit.

A

engine and systems; upper

55
Q

Placing the Speed Reference Selector (outer) to ___________ allows for manual entry.

A

V1, VR, WT, VREF, Bug 5

56
Q

Placing the Speed Reference Selector (outer) to ___________ allows for airspeeds and gross weight to be provided automatically through the FMC.

A

AUTO

57
Q

On the Speed Reference Selector, rotating the Inner knob ________ sets the appropriate reference airspeed or gross weight.

A

manually

58
Q

On the Captain Brightness Controls, rotating the inner knob on the INBD DU BRT, adjusts ______________ on the Captain inboard display unit.

A

weather radar and terrain display brightness

59
Q

On the Captain Brightness Controls, rotating the outer knob on the INBD DU BRT, adjusts ______________ of the Captain inboard display unit.

A

the brightness

60
Q

On the Captain Brightness Controls, rotating the LOWER DU BRT or the UPPER DU BRT knob, adjusts ______________ of the respective display unit.

A

the brightness

61
Q

On the Captain Brightness Controls, rotating the OUTBD DU BRT, adjusts ______________ of the Captain outboard display unit.

A

the brightness

62
Q

On the PFD Attitude Indicator, a failed attitude display is indicated by _____________.

A

an amber ATT flag

63
Q

On the PFD Attitude Indicator, if the Captain’s and First Officer’s pitch display differs by more than 5 degrees, a _____________ appears.

A

an amber PITCH flag

64
Q

On the PFD Attitude Indicator, if the Captain’s and First Officer’s roll display differs by more than 3 degrees, a _____________ appears.

A

an amber ROLL flag

65
Q

On the PFD Attitude Indicator during a TCAS RA, the areas inside the red lines indicate the pitch region(s) to _________ in order to resolve the traffic conflict.

A

avoid

66
Q

On the PFD Altimeter Indicator, the BARO Minimums Pointer (green) indicates the barometric minimums as set by the ____________________.

A

minimums selector on the EFIS control panel

67
Q

On the PFD Altimeter Indicator, the Digital Readout (white) displays current altitude. ________ appears when the altitude is below zero feet.

A

A negative sign

68
Q

On the PFD Altimeter Indicator, if the Captain and First Officer altimeter disagree by more than ______ feet for more than 5 seconds, an amber ALT DISAGREE alert is displayed.

A

200

69
Q

On the PFD Vertical Speed Indicator, if vertical speed fails, __________________.

A

an amber VERT flag appears and the pointer is removed

70
Q

On the Clock, in order to cycle between UTC or manual time, press the ______________.

A

TIME/DATE pushbutton in top right corner

71
Q

Standby Magnetic Compass is located ________________ and displays magnetic heading.

A

on the center post above glareshield

72
Q

The approach mode selector on the Standby Attitude Indicator provides ILS signals provided by the ______ ILS receiver.

A

No. 1

73
Q

On the Standby Attitude Indicator, unreliable attitude is indicated by ___

A

a GYRO flag

74
Q

The Standby Altimeter receives static pressure from ____________.

A

the alternate static ports

75
Q

The Standby Airspeed Indicator receives ram pressure from the auxiliary pitot probe and static pressure from

A

the alternate static ports

76
Q

On the Integrated Standby Flight Display (ISFD), airspeed and altitude are computed from the pneumatic pressure data provided by direct connections to the ___________.

A

auxiliary pitot and alternate static ports

77
Q

On the Integrated Standby Flight Display (ISFD), the ILS information is received from the _______.

A

No. 1 Multi-Mode Receiver (MMR)

78
Q

On the Integrated Standby Flight Display (ISFD), heading information is provided from _______________.

A

the #1 ADIRU

79
Q

The Barometric (BARO) Reference Selector (outer), on the EFIS control Panel, allows for selection of ____________ for barometric reference.

A

IN or HPA

80
Q

On the EFIS control Panel, the VOR/ADF switches displays the selected VOR bearing pointer, frequency or identification and DME on all navigation modes except ____________.

A

PLAN

81
Q

On the EFIS control Panel, placing the Mode Selector to APP or VOR displays information in a __________ format.

A

heading-up

82
Q

On the EFIS control Panel, placing the Mode Selector to MAP displays information in a __________ format.

A

track-up

83
Q

On the EFIS control Panel, placing the Mode Selector to PLN displays information in a __________ format.

A

true north up

84
Q

On the EFIS control Panel, pushing the _____ button would allow for Vertical Situation Display in MAP mode as installed.

A

CTR

85
Q

On the EFIS control Panel, the Range Selector adjust the display range in ________ for APP, VOR, MAP or PLN mode.

A

nautical miles

86
Q

On the EFIS control Panel, pushing the _____ button would allow for the display of TCAS information.

A

TFC

87
Q

On the EFIS control Panel, pushing the STA button would allow for the display of high altitude data base navigation aids on map scales _________.

A

80, 160, 320, or 640

88
Q

On the EFIS control Panel, pushing the ____ button would allow for the display of waypoints in the FMC data base which are not in the flight plan route if the selected range is 40 nm or less.

A

WPT

89
Q

On the EFIS control Panel, pushing the ____ button would allow for the display of all airports stored in the FMC database.

A

ARPT

90
Q

On the EFIS control Panel, pushing the ____ button would allow for the display of estimated time of arrival for each active route waypoint.

A

DATA

91
Q

On the EFIS control Panel, pushing the ____ button would allow for the display of IRS positions, GPS positions, and VOR bearing vectors extended from the nose of the aircraft symbol to the stations

A

POS

92
Q

In the Expanded MAP Mode, the distance to the next active waypoint is displayed ____________.

A

top right corner

93
Q

In the Expanded MAP Mode, the True Airspeed is displayed ____________.

A

top left corner

94
Q

In the Expanded MAP Mode, the Estimated Time of Arrival at Next Active Waypoint is displayed ____________.

A

top right corner

95
Q

How is the weather radar transmitter energized and able to display weather radar returns?

A

by pressing the WXR (weather radar) on the EFIS control panel

96
Q

When the weather radar is selected to the 640 nm range, weather radar returns are limited to ________.

A

320 nm

97
Q

On the ground, the flight recorder begins operating _________________________.

A

when either engine is operating

98
Q

Moving the flight recorder test switch from NORMAL (guarded position) to TEST _________________________.

A

powers the flight recorder on the ground

99
Q

An amber OFF light on the flight recorder panel indicates______________.

A

the flight recorder is not operating