Flight Instruments Flashcards
_____ to silence the Mach/Airspeed Overspeed Warning
clacker.
Reduce airspeed below Vmo/Mmo
CDS FAULT (amber) indicates ______.
a non-dispatchable CDS fault has occurred
DISPLAY CONTROL PANEL (amber) indicates ______.
a failed EFIS Control Panel on the affected side
EFIS MODE/NAV FREQ DISAGREE (amber) indicates _____.
Select ALL correct answers.
APP is selected with a VOR tuned
4) VOR is selected with an ILS tuned
CDS MAINT (white) indicates ______.
a dispatchable CDS fault has occurred
The Maximum (Vmax) Speed is indicated by ______.
the bottom of the red and black alternating hash marks
forming a vertical bar in the upper portion of the
airspeed tape
The Primary Flight Display (PFD) shows _____
ILS information
2) approach minimums
3) TCAS Avoidance Pitch Commands
4) all of the above
Enter the runway _____ using the RWY key on the HGS
Control Panel.
length and elevation
The Minimum Maneuvering Speed (Vmvr) for full maneuver
capability is indicated by ______.
the top of the amber bar in the lower portion of the
airspeed tape
On approach at destination”,” the amber crosshatched area
shows the ____.
FMC landing altitude for destination runway or airport
The Minimum Safe Operating (Vmin) Speed is indicated by
______.
the top of the red and black alternating hash marks
forming a vertical bar”,” in the lower portion of the
airspeed tape
The triangular pointer and line (green) on the Altitude
Display shows Minimums in feet ____ with Minimums
Reference Indicator on EFIS panel set to _____.
MSL / BARO
The current heading is indicated _____.
under the Current Heading Pointer triangle (white)
The _____ appears on the attitude indicator _____.
Radio Altitude / below 2500 ft AGL
The PFD automatically displays on the \_\_\_\_\_ if the Outboard Display Unit (DU) fails
inboard DU
