Flight Inst, Disp

Question 1

What does the Integrated Standby Flight Display (ISFD) display with APP annunciated?

Answer 1

Approach mode is selected - ILS localizer and Glide Slope deviation data displayed

(Sec 10.010 p 11)

Question 2

If the Outboard Display Unit (DU) fails, where does the PFD display?

Answer 2

automatically switches to the inboard display

Sec 10.010 p 30

Question 3

Which display unit provides ILS info, approach minimums, and TCAS commands?

Answer 3

Primary Flight Display (PFD)

Sec 10.020 p 1

Question 4

What does the Speed Bud (magenta hollow arrow) indicate?

Answer 4

points to the airspeed that has been manually selected in the IAS/MACH window or indicates the FMC computed airspeed when the IAS/MACH window is blank

(Sec 10.020 p 4)

Question 5

What indicates the Maximum (Vmax) Speed?

Answer 5

red and black alternating hashmarks forming a vertical bar at the top of the airspeed tape

(Sec 10.020 p 4)

Question 6

What indicates the Maximum Maneuvering Speed?

Answer 6

a vertical amber bar at the top of the airspeed indicator

Sec 10.020 p 4

Question 7

What indicates the Minimum Maneuvering Speed (Vmvr) for full maneuver capability?

Answer 7

vertical amber bar extending up from the Minimum Speed Bar

Sec 10.020 p 6

Question 8

What indicates the Minimum Safe Operating (Vmin) Speed?

Answer 8

alternating red and black vertical bar extending from the bottom of the airspeed tape

(Sec 10.020 p 7)

Question 9

What is the Mach/Airspeed Overspeed aural warning? How do you silence it?

Answer 9

Clacker - only silenced by reducing speed below Vmo/Mmo

Sec 10.020 p 10

Question 10

What does the Pitch Limit Indication (PLI) indicate?

Answer 10

Shows the pitch limit as calculated by the SMYD and the safe maneuver margins for pitch control

(Sec 10.020 p 12)

Question 11

On the altitude tape, what does the amber crosshatched area represent on approach at destination?

Answer 11

Landing altitude indication

• FMC landing altitude for destination runway or airport, or
• the landing altitude for departure runway or airport until 400 nm from departure or one-half the distance to destination (lesser)

(Sec 10.020 p 25)

Question 12

With Minimums Reference Indicator on EFIS panel set to BARO, what does the triangular pointer and the line (green) on the Altitude Display represent?

Answer 12

selected barometric approach minimums

Sec 10.020 p 26

Question 13

When does Radio Altitude appear on the attitude indicator?

Answer 13

When MINS selector is set to RADIO

Sec 10.020 p 27

Question 14

Where is the current heading indicated?

Answer 14

White triangle at the top of the compass rose at the bottom of the PFD

(Sec 10.020 p 30)

Question 15

When does the ALTITUDE DISAGREE Alert appear?

Answer 15

When the Capt and F/O altitude indications disagree by more than 200 ft for more than 5 continuous seconds

(Sec 10.020 p 37)

Question 16

What does DISPLAYS CONTROL PANEL (amber) indicate?

Answer 16

a failed EFIS Control Panel on the affected side

Sec 10.020 p 33

Question 17

What does INSTR SWITCH (amber) indicate?

Answer 17

The Capt and FO displays are using the same source of IRU data – IRS switch on overhead panel is not in the NORMAL position

(Sec 10.020 p 34)

Question 18

What does CDS MAINT (white) indicate?

Answer 18

A dispatchable CDS fault has occurred. Displayed on ground only, prior to start of second engine

(Sec 10.020 p 35)

Question 19

What does CDS FAULT (amber) indicate?

Answer 19

A non-dispatchable CDS fault has occurred. Displayed on ground only, prior to start of second engine

(Sec 10.020 p 35)

Question 20

What does DSPLY SOURCE (amber) indicate?

Answer 20

DEU 1 or DEU 2 have failed

Sec 10.020 p 35

Question 21

How do you step through the active route on the ND in PLN mode?

Answer 21

CDU LEGS page 6R and Next Page functions

Sec 10.030 p 3

Question 22

What does EFIS MODE/NAV FREQ DISAGREE (amber) indicate?

Answer 22

• -APP is selected with VOR freq tuned
• -VOR is selected with ILS freq tuned

(Sec 10.030 p 24)

Question 23

What information is entered using the RWY key on the HGS Control Panel?

Answer 23

RWY length and RWY elevation

Sec 10.040 p 8

Question 24

What does RO CTN (amber) on the HGS Digital Annunciator Panel indicate?

Answer 24

Only used during a MX Test

Sec 10.040 p 10