Flap Extension Policy Flashcards

1
Q

What is the AOM policy guidance associated with flap extensions?

A
  • Avoid selecting flaps at or near the Flaps Placard Limit Speed.
  • Extend and retract flaps using the PFD flap maneuvering speeds (on the recommended speed schedules).

CAUTION: Extending the flaps at or near the flap placard limit speed can result in an inadvertent flap overspeed in gusty wind conditions. Flap extension significantly above the maneuver speed for the current flap position can result in a flap overspeed if the flap lever is inadvertently moved beyond the requested position.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

What is the purpose of the TE Load relief system?

A

The system protects the flaps from excessive air loads.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

What are the flap settings which enable the TE Flap Load Relief function?

A
  • -700: Flaps 30 and 40

* -800/ MAX: Flaps 10, 15, 25, 30, and 40

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

What is required of the Captain when an ACARS OVRSPD DETECTED message is generated in the post flight report?

A

Record the overspeed information in the logbook and notify Dispatch/Maintenance Control.Note: The overspeed message, or lack thereof, does not relieve the Flight Deck Crew of the responsibility to write up an overspeed and notify Dispatch/ Maintenance Control.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly