FFOD Tests Flashcards
Fire FFOD Test
7 Red, 4 Green
- FIRE DETECTION TEST button - Press and hold for 2 seconds
- Verify these EICAS msg and indications:
- FIRE SYS OK advisory msg
- Both MASTER WARNING lights on
- LH and RH ENG FIRE PUSH lights on
- APU FIRE PUSH light on
- BOTTLE 1 and BOTTLE 2 ARMED PUSH TO DISCH lights on
- APU BOTTLE ARMED PUSH TO DISCH lights on
- FWD and AFT CARGO SMOKE PUSH lights on
- BOTTLE ARMED PUSH TO DISCH light on - When the test is complete, verify all msgs removed.
Hydraulic FFOD Test
- All HYD Pump switches off
- Verify HYD SOV 1(2) CLOSED advisory messages out
- HYD page
- Disengage STAB TRIM and verify STAB TRIM caution msg
- HYD 1, 3B, 2 - ON
- Check all fluids at least 45% and normal press and temp
- STAT page
- Engage STAB TRIM CH1 and 2
If SPLR/STAB IN TEST advisory msg appears, don’t touch rudder pedals, tiller, hyd pump switches or disengage stab trim for 60 SECONDS
- HYD page
- HYD 1, 3B, 2 - AUTO
- Verify pressure depletion
- HYD 3A - ON
- Check press, quantity and temp for SYS 3 normal
- Done: all switches down
Ice Detector FFOD Test
- DET switchlight - press and hold
- Verify:
- ICE light illuminates
- ICE caution msg appears
- ADS HEAT TEST OK advisory msg appears - Release and verify all msgs out
Stall FFOD Test
SAME and NO 5.8-6.2 requirement
Stall FFOD Test
SAME and NO 5.8-6.2 requirement
Aileron/Rudder Trim FFOD Test
- SAME *
Aileron/Rudder Trim FFOD Test
- SAME *
Anti-Skid FFOD Test
- Anti-Skid - ARMED
and verify not present:
- A/SKID INBD
- A/SKID OUTBD - Anti-Skid - OFF
and verify these CAUTION messages are present:
- A/SKID INBD
- A/SKID OUTBD - Anti-Skid - ARMED
and verify not present:
- A/SKID INBD
- A/SKID OUTBD
MLG Bay Overheat FFOD Test
- SAME *
MLG Bay Overheat FFOD Test
- SAME *
Oxygen FFOD Test
- SAME *
Oxygen FFOD Test
- SAME *
PA FFOD Test
- SAME *
PA FFOD Test
- SAME *
TCAS FFOD Test
- SAME *
TCAS FFOD Test
- SAME *
CVR FFOD Test
- CVR TEST - Press and hold 5 sec.
- Verify green light
** If CVR has Recording Independent Power Supply (RIPS), the test also confirms the RIPS battery is charged. If test fails right after power up, wait 15 minutes and try again after RIPS battery charged **
Fuel Check Valve (Start)
FFOD Test
- SAME *
Fuel Check Valve (Start)
FFOD Test
- SAME *
Fuel Check Valve (Shutdown)
FFOD Test
- SAME *
Fuel Check Valve (Shutdown)
FFOD Test
- SAME *