F Flashcards
The management process by which managers think their through in advance
and where the organization’s mission, vision, goals and objectives are made
is called ___________.
a. organizing
b. controlling
c. staffing
d. planning
d. planning
What is the ratio of output over input?
a. planning
b. efficiency
c. effectiveness
d. none of the above
b. efficiency
The fund collected by the government to finance its activities.
a. credit
b. tax
c. enterprise
d. dividend
b. tax
What is the term used for the effective and efficient use of scarce
resources to achieve organizational goals?
a. Farm Management
b. Management
c. Agriculture
d. Agricultural Economic
b. Management
It is the process of management where managers coordinate the human and
material resources of the organization.
a. Planning
b. Organizing
c. Staffing
d. leading
b. Organizing
This is also known as the ad valorem tax.
a. tax
b. capital
c. value added tax
d. interest
c. value added tax
. A payment for the use of money, generally stated as a percentage of the
amount or principal borrowed is called __________.
a. duty
b. credit
c. dividend
d. none of the above
d. none of the above
Which of the following is not a managerial role:
a. mediator
b. monitor
c. liaison
d. none of the above
a. mediator
Which of the following Cs in marketing is directly linked with the place
or distribution decision?
a.customer satisfaction
b.cost recovery
c.convenience
d.communication
c.convenience
Which of the following are characteristics of a good channel of
distribution?
a. It has a good track record.
b. It has the capability to handle a wide variety of products.
c. It has growth potential
d. All of the above.
d. All of the above.
Promotion corresponds to what C of marketing?
a. Communication
b. Convenience
c. Cost
d. Customer satisfactio
a. Communication
Which is not an English or English derived unit?
a. foot
b. Pascal
c. ft-lb/sec
d. pounds
b. Pascal
Which is not an SI unit?
a. psi
b. Pascal
c. Newton
d. Ampere
a. psi
A sprayer designed to charge the spray droplet so that there is a
powerful attraction between the plants and the charged droplet.
a. Electromagnetic sprayer
b. Electrolytic sprayer
c. Electrostatic sprayer
d. All of the above
c. Electrostatic sprayer
It is used to protect tractor operator from dust, noise, rain and heat.
a. Operator’s shield
b. Chasis
c. Cab
d. None of the above
c. Cab
A device at a header of a combine for severing the plant stalk.
a. Cutting mechanism
b. Star wheel
c. Pickup
d. None of the above
a. Cutting mechanism
A device that transfer seed from the seedbox to the coulter tube at a
fixed rate
a. Seed feeder
b. Seed distributor
c. Seed metering device
d. All of the above
c. Seed metering device
A device for gathering crops on a window of a combine.
a. Header
b. Pickup
c. Star wheel
d. None of the above
b. Pickup
A transport machine used in agriculture suitably designed for coupling to
an agricultural tractor or self-propelled combine.
a. Agricultural wagon
b. Agricultural loader
c. Agricultural trailer
d. None of the above
c. Agricultural trailer
A harvest residue discharged from cleaning devices of a combine.
a. Foreign matters
b. Cut straw
c. Chaffs
d. None of the above
c. Chaffs
An external shaft on an agricultural tractor other than the PTO which
provides rotational power to implements that are usually front and side
mounted.
a. Belt drive shaft
b. Secondary PTO
c. Auxiliary PTO
d. None of the above
c. Auxiliary PTO
In ASAE, safety code for laboratory equipment and typical application,
the safety yellow color stands for
a. Danger stop
b. Warning
c. Caution
d. None of the above
c. Caution
A rotating device located inside the hopper of gravity flow applicator
and broadcast spreaders to enhance delivery of granules to the adjustable
orifice of the machine.
a. Mixer
b. Stirrer
c. Agitator
d. None of the above
c. Agitator
The standard length of stroke of hydraulic remote control cylinders for
trailing-type agricultural implement is
a. 6 to 12 inches
b. 8 to 16 inches
c. 10 to 20 inches
d. None of the above
b. 8 to 16 inches
ASAE classification for slow moving vehicle such as animal-drawn or
motorize conveyance, including implements in tow should not be exceeded a
travel speed of
a. 30 kph
b. 40 kph
c. 50 kph
d. None of the above
b. 40 kph
A safety gray color at the ASAE safety code is code for
a. Floor or work area around machines and Equipment
b. Areas with radiation hazard
c. Traffic and housekeeping areas
d. All of the above
a. Floor or work area around machines and Equipment
When pipeline is painted with green and white color, the safety code
means that the pipe contains
a. Liquid of inherently low hazard
b. Flammable or explosion materials
c. Fire extinguishing materials
d. All of the above
a. Liquid of inherently low hazard
The perpendicular distance between the upper hitch point and the common
axis of the lower hitch point of a tractor.
a. Mast height
b. Hitch vertical height
c. Stud height
d. None of the above
a. Mast height
Minimum thrust per drawbar horsepower of hydraulic remote control
cylinder for trailing type agricultural implement.
a. 68 kg
b. 78 kg
c. 88 kg
d. None of the above
a. 68 kg
The distance between lower hitch point measured at the base of the lower
hitch stud, or the distance between the inner most restraining means provided
on the implement.
a. Lower hitch-point spread
b. Lower hitch point distance
c. Lower hitch point clearance
d. None of the above
a. Lower hitch-point spread
For safety purposes, slow-moving vehicle such as agricultural machines
must be provided with
a. Rear bumper to protect the machine from impact
b. Identification emblem to guide motorist that the machine is slowmoving
c. Signal light when traveling
d. None of the above
b. Identification emblem to guide motorist that the machine is slowmoving
The identification of the given tire with its maximum recommended load
when used in specific type service.
a. Tire rating
b. Tire lug rating
c. Ply rating
d. All of the above
c. Ply rating
The primary gas produced during gasification.
a. Methane
b. Carbon Dioxide
c. Carbon Monoxide
d. All of the above
c. Carbon Monoxide
A machine that is used with small plow and harrow designed for rice
farming operation.
a. Puddling-type floating tiller
b. Power tiller
c. Hydro tiller
d. All of the above
b. Power tiller
An engine that burns fuel inside the cylinder.
a. External combustion engine
b. Internal combustion engine
c. Sterling engine
d. None of the above
b. Internal combustion engine
It is part of moldboard plow that is used to cut the soil.
a. Moldboard
b. Share
c. Shin
d. None of the above
b. Share
A mechanical breaking up of fuel into spray droplets by high velocity of
air passing through a jet.
a. Atomization
b. Carburetion
c. Turbo charging
d. None of the above
a. Atomization
Engine having fuel injected into the combustion chamber near the end of
the combustion stroke and is ignited by heat of compression only.
a. Gasoline engine
b. Diesel engine
c. Steam engine
d. None of the above
b. Diesel engine
. Firing order of 4-cylinder engine.
a. 1-2-3-4
b. 1-3-4-2
c. 1-2-4-3
d. None of the above
b. 1-3-4-2
Engine system that reduces the temperature of the cylinder.
a. Ignition System
b. Carburetor System
c. Cooling System
d. None of the above
c. Cooling System
A biogas is generated inside the
a. Gas holder
b. Mixing tank
c. Digester
d. None of the above
c. Digester
When a biogas contains 40 % methane and 60 % carbon dioxide,
86
a. The biogas can be used for cooking
b. The biogas can run gas refrigerator
c. The biogas can be used for lighting
d. None of the above
d. None of the above
The feed material to water ratio for biogas generation is
a. 1:0.5 to 1:1
b. 1:1 to 1:2
c. 1:2 to 1:3
d. None of the above
b. 1:1 to 1:2
A solid biomass fuel burning device used for domestic cooking water
heating, smoking, roasting and simmering.
a. Furnace
b. Cookstove
c. Biomass oven
d. None of the above
b. Cookstove
The percentage primary air requirement based on the total air for the
combustion of fuel in a cookstove.
a. 80 %
b. 60 %
c. 40 %
d. None of the above
a. 80 %
A chamber where combustion of fuel takes place.
a. Damper
b. Chimney
c. Fire box
d. None of the above
c. Fire box
Elements necessary for combustion.
a. Fire
b. Air
c. Fuel
d. All of the abov
d. All of the above
Air required for complete combustion of combustible gasses.
a. Stoichiometric air
b. Primary air
c. Secondary air
d. All of the above
c. Secondary air
The amount of heat required to raise the temperature of one pound water
by one degree Farenheight.
a. Kcal
b. BTU
c. Joule
d. None of the abov
b. BTU
The excessive amount of tars produced in the combustion of agricultural
waste is primary due to:
a. Insufficiency of fuel
b. Less air is used
c. Too much air used
d. None of the above
b. Less air is used
Open-fire stove has a thermal efficiency of:
a. 3-11 %
b. 11-20 %
c. 20-30%
d. All of the above
a. 3-11 %
The thermal efficiency of a cookstove can be increased by:
a. Increasing the amount of fuel
b. Using more air for the fuel
c. Insulating the stove
d. All of the above
c. Insulating the stove
The power output of an agriwaste-fired multiple-burner stove can be
increased by:
a. Providing large connecting tunnel for the pot holes
b. Increasing the height of the chimney
c. Providing damper to control the flow of passage of air
d. All of the above
a. Providing large connecting tunnel for the pot holes
The recommended angle for the inclined metal grates on the step-gratetype stove.
a. 45-60 deg
b. 30-40 deg
c. 60-80 deg
d. None of the above
a. 45-60 deg
A gas produced from agricultural waste which is odorless, tasteless,
colorless and flammable.
a. Biogas
b. CO
c. CH4
d. None of the above
c. CH4
C-N ratio suitable for anaerobic digestion of agriwaste.
a. 10:1 to 20:1
b. 20:1 to 30:1
c. 30:1 to 40:1
d. None of the above
b. 20:1 to 30:1
The primary gas produced during anaerobic digestion of agricultural
wastes.
a. CH4 & H2S
b. CH4 & CO2
c. CH4 & CO
d. All of the above
b. CH4 & CO2
The power output of diesel engine, when powered with gas producer at an
arbitrary speed will be reduced by
a. 10-20 %
b. 30-50 %
c. 50-70 %
d. None of the above
a. 10-20 %
The percentage amount of diesel fuel can be replaced by gas producer
a. 20-40 %
b. 50-70%
c. 90-100%
d. None of the above
b. 50-70%
The projection of cash inflow and outflow of a farm to estimate the
incremental net benefit of the life of the project is known as:
a. Farm budget
b. Farm plan
c. Farm inventory
d. Farm contract
a. Farm budget
Type of engine that can be fueled with producer gas.
a. Gas engine
b. Diesel engine
c. Gasoline engine
d. All of the above
d. All of the above
The bulk density of rice husk.
a. 50-80 kg/m3
b. 100-120 kg/m3
c. 140-160 kg/m3
d. None of the above
b. 100-120 kg/m3
Type of engine commonly used for tractors:
a. 4-stroke-spark-ignition engine
b. 4-stroke-compression-ignition
c. 2-stroke-spark-ignition
d. 2-stroke-compression-ignition
b. 4-stroke-compression-ignition
As a rule of thumb, single-phase alternating current electric motor
should be used for applications requiring:
a. < 4 hp
b. < 5 hp
c. < 6 hp
d. < 7 hp
b. < 5 hp
Soil working part utilized by push-type weeders for dryland operation is:
a. blade type
b. tine type
c. rotary type
d. all of the above
d. all of the above
Type of soil working parts utilized by push-type weeders for wetland
operation:
a. blade type
b. tine type
c. rotary type
d. all of the above
c. rotary type
Which of the following is not measured in calibrating a sprayer?
a.nozzle discharge
b.effective working width
c.walking speed
d.application rate
d.application rate
Which of the following belong to the group of variable displacement pump?
a. centrifugal pump
b. mixed flow pump
c. air lift pump
d. all of the above
d. all of the above
Which of the following is not a part of a typical lift pump?
a. inlet valve
b. piston
c. plunger
d. bucket valve
c. plunger
In the equation for horsepower, Hp =
QxH/3960xEff
, Q is pump output in:
a. gallons
b. gpm
c. liters
d. lps
b. gpm
Which of the following is not a typical example of a small single-cylinder
engine?
a. air-cooled gasoline engine
b. water-cooled gasoline engine
c. air-cooled diesel engine
d. water-cooled diesel engine
b. water-cooled gasoline engine
