Extended FCR Flashcards
What level DTED data?
DTED Level 1
DTED Not found on RMM
FCR DEGR on UFD
FCR DTED LOAD FAIL on fault page
DTED found on RMM but not downloaded correctly
FCR FAULT on UFD
FCR DTED DOWNLOAD FAIL on fault page
DTED not vaild
reverts to legacy flat earth model
Elevation tick marks
6 degress +/- 30
MRFI
Modernized Radar Frequency Interferometer
REU
Radar Electronics Unit
FCR Components
MMA
MRFI Processor
REU
5 FCR Modes
GTM / RMAP ATM MTM TPM Surveillance
FCR Link Bias Calibration overview
Complete after major maintenance or by crew
TADS internal boresight required (ALIGN barriered)
Near and Far bar must be completed (no order)
Stationary round type target (not helicopter)
FCR Link Bias Calibration recommended altitude
200 - 500 ft above target
FCR Link Bias Calibration PFZ sizes
200m square for Near Bar
300m square for Far Bar
FCR Link Bias Calibration allowable range limits
Near calibration: 500-2000m
Far calibration: 4000-6000m
Describe the FCR Link Bias Calibration PFZ
A PFZ is created around the NTS when link is selected to ensure the same target is used for 5 follow on scans (not mandatory).
200m square for Near Bar
300m square for Far Bar
PFZ is deleted when the calibration is complete or CPG selects CONFIRM
STT
Single Target Track - allows the crew to continuously “track” a desired target (stationary or moving)
3 ways to initiate STT
- During single or continuous - select a NTS, STT
- After scan completion - select a NTS, STT
- ZFOV, Continous scan; STT auto enabled when NTS detected.
STT loss
> 14 lost:
HAD = R?.?
Icon Stale
FOV returns to 90 deg in continuous scan
Describe MTM
M selected on B4
Added 4 new icons
Shore Line creates a synthetic shoreline visible
All targets reported as maritime
JMAC
Joint Multi-Platform Advanced Combat Identification
Describe JMAC
uploadable library for further classification
loaded on RMM
not transmitted offboard
only available in STT
only available out to 8k in ATM and 6.5k in GTM
New JMAC Icons
UAV UAV Small UAV Medium UAV Large Fixed Wing Jet Fixed Wing Prop
New Schemes
A - replaced with ABN STAT SFC (air and stat surface)
B - replaced with STAT SFC (stat surface)
C - replaced with ABN MVG SFC (air and mov surface)