B3v6 - ASM

Question 1

ASM Overview changes

Answer 1

96.5% Low Rotor Warning
1.096 ETFs used on PERF page - Uploadable
FLI (First Limit Indicator)
MMP Failure changes

Question 2

Low rotor exceedance

Answer 2

90%

Question 3

Low Rotor Annunciation change

Answer 3

93.5% to 96.5%

Question 4

New ETF calc range

Answer 4

up to 1.096

Question 5

Default perf version

Answer 5

10000000

Question 6

FLI

Answer 6

HMD/FLT/IMC 10% of NG, TGT, or Q
Yellow at 2%
Total range 12%

Question 7

FLI NG methods

Answer 7

NG Limiting method utilizes legacy PERF calc
SE uses lowest ETF
DE uses average ETF

Question 8

FLI TGT methods

Answer 8

Limiting uses TGT remaining and converts to TQ

Calc remining power, uses closest to limit

Question 9

FLI DE (normal operation)

Answer 9

1ST LIMIT 2ND LIMIT
100% TQ (XSM) - hard limit 100% TQ
Calc 10min Q (NG) - hard limit Calc 2.5min DE Cont Q
Calc 10 min Q (TGT) - soft limit

Question 10

FLI DE (contingency)

Answer 10

Calc 2.5min Q - hard limit
100% TQ (XSM) - hard limit
No second limit

Question 11

FLI SE (OEI)

Answer 11

1ST LIMIT 2ND LIMIT
Calc 2.5min Q - hard limit Calc 2.5min Q
110% TQ - soft limit 120% TQ

Question 12

FLT TQ value color change

Answer 12

Fixed value changed to at or above 1st limiter.

Question 13

FLI ENG page change

Answer 13

dashed white lines above TQ
lower line is 1st limiter
upper line - only if 1st is soft = DE Cont power avail or 100% XSM limit

Question 14

FLI ENG page lines joined together

Answer 14

1st limit is hard (NG limiting, DE Cont, XSM limited)

Question 15

Low Airspeed Detection

Not Complete

Answer 15

Set = TAS < VSDE + Buffer
Clear = TAS > VSDE + Buffer +2kts or OGE capable
Enabled = PERF valid, NR > 98%, >80% TQ, and

Question 16

MMP Failure changes

Answer 16

MP CRITICAL FAIL - can cause single MP operations
MP NON CRIT FAIL - can cause switchover dual MP ops
MP FAULT - Do not cause switchover