Evolution 2 Utilize a Foam Carrier to deliver finished foam to a handline/deckgun

Question 1

Foam Carrier stops at supply pumper located at the hydrant. Members pull sufficient 3½” hose to attach to supply pumper. Use the hose load ending with the ______ coupling.
Fill in the blank

Answer 1

2.2

Female

Question 2

Carrier proceeds, stretching 3½” hose to a point as close to the operation as possible. The Chauffeur connects the 3½” hose to what type of inlet of the foam carrier?

Answer 2

2.3 & 2.4

Gated

Question 3

The chauffeur opens the gate to the large caliber self-educting foam nozzle. One member climbs onto the deck of the apparatus. Water is started. The self-educting nozzle with its pre-connected pick up tube will start to deliver finished firefighting foam. When should the member train the nozzle at the fire?

Answer 3

2.6 & 2.7

This member trains the nozzle at the fire when the finished firefighting foam is flowing through the nozzle.

Question 4

The remaining members of the company now place a foam hand line into operation by stretching sufficient ___” hose from the pre-connected eductor.
Fill in the blank

Answer 4

2.8

1¾”

Question 5

For example, a 310 GPM high capacity foam nozzle and a 95 GPM foam nozzle could supply 405 GPM of solution. Educting at 3% solution, there will be enough concentrate in the 1000-gallon booster tank for approximately __ minutes.
Fill in the blank

Answer 5

2.12

80

Question 6

The pumper supplying water to the Carrier can be used to supply other handlines.
True or false

Answer 6

2.13
False
The pumper supplying water to the Carrier should be designated for the Carrier only.