Engine Motoring

Question 1

Engine can be motored maximum of ____.

Answer 1

2 MIN

Question 2

IPP must be operated minimum of ____ before motoring engine.

Answer 2

1 MIN

Question 3

If ____ attempts are made in a 120 min period, ESG must have ____ cool down or ____ of IPP operation to decrease ____ and ____ Temperature.

Answer 3

TWO START / 120 MIN / 10 MIN / ICC 1 / ICC 2

Question 4

Engine start cannot be accomplished until after ____ of PCD is on (approx. ____ after IPP start).

Answer 4

RH SIDE / 2 MIN

Question 5

PARKING BRAKE must be cycled from ____ position to ____ position then to PARKING BRAKE position to engage.

Answer 5

PARKING BRAKE / OFF

Question 6

Engine can be motored ____ time with GEN HOT 1&2 ICAW shown. If GEN HOT 1&2 ICAW ____ go away during ____ motor, motoring must be stopped to troubleshoot.

Answer 6

ONE / DOESN’T / 45 SEC

Question 7

Engine must not be motored with ____ HOT ICAW shown.

Answer 7

FUEL

Question 8

Engine can be motored with GEN OIL FAIL 1&2 ICAW but must go away within ____ or engine motoring should be stopped. Engine motoring can be tried for a ____ attempt but also must go away within ____. IF ICAW is still present after ____, motoring must be stopped to troubleshoot.

Answer 8

45 SEC / SECOND / 45 SEC / 45 SEC

Question 9

When motoring, monitor engine indications of PCD engine page and make sure ____ RPM stabilizes at ____% RPM’s.

Answer 9

N2 / 11-19