Engine Inspection Flashcards
1
Q
- What steps must be taken to prepare an aircraft for a 100- hr inspection?
A
Remove or open all panels inspection doors and cowlings
Clean the aircraft & engine
2
Q
- What may be used a a guide for a 100 hr inspection?
A
FAT Part 43 Appendix D
3
Q
- What additional inspection must be performed if the cylinder compression is weak?
A
An internal cylinder inspection
4
Q
- Where are the aircraft engine operating limitations found?
A
TCDS or Aircraft Specifications
5
Q
- Where can a mechanic look to identify and aircraft engine?
A
Engine Identification plate mounted to engine
6
Q
- What publication is needed to inspect an engine for conformity with specifications?
A
Engine Specifications or TCDS
7
Q
- What type of FAA approval is required when a change to an engine design is not enough to require a new type certificate?
A
Supplemental Type Certificate (STC)
8
Q
- What type of FAA approval is required when a change is made to the engine principle of operation?
A
New Certificate must be obtained
9
Q
- What instrument used for internal inspections has been a mainstay of engine inspections for many years?
A
Borescope
10
Q
- What additional inspection should you perform if you find a cylinder has weak compression?
A
Cylinder leak down test
11
Q
- How does an oil analysis program help to evaluate the internal condition of an engine?
A
Establishes a trend of engine health
12
Q
- Do you perform an engine ground run after performing a 100 hr inspection?
A
Yes
