Engine AE3007A1 (LR)(MP)

Question 0

Maximum oil pressure at or above 88% N2

Answer 0

110psi (6)
(6) operation in oil pressure amber range between 111 and 115 psi is permitted in all operational modes and time limited to 5 minutes, or between 116 and 155 psi in all operational modes time limited to 2 minutes. Total time above 110 psi may not exceed 5 min.

Question 1

Maximum oil pressure below 88% N2

Answer 1

110psi (2)(6)

(2) may be exceeded during starts if oil temp is below 21 C. The eng. must remain at IDLE until pressure is less than 110psi.
(6) operation in oil pressure amber range between 111 and 115 psi is permitted in all operational modes and time limited to 5 minutes, or between 116 and 155 psi in all operational modes time limited to 2 minutes. Total time above 110 psi may not exceed 5 min.

Question 2

Max N1 speed

Answer 2

100%

Question 3

Max N2 speed

Answer 3

102.4%

Question 4

Max ITT temp for start

Answer 4

800C

Question 5

Max ITT temp for take off modes

Answer 5

948C

(1) limited to 5 min

Question 6

Max continuous ITT temp

Answer 6

901C

Question 7

Minimum oil pressure below 88% N2

Answer 7

34psi

Question 8

Min oil pressure at or above 88%N2

Answer 8

50psi

(7) operation between 34 and 50 psi is permitted during take off and go around phases

Question 9

Minimum oil temp for operation

Answer 9

21C

(3) minimum oil temp for starting is -40C

Question 10

Max oil temp

Answer 10

126 degrees Celcius

Question 11

Min fuel temp

Answer 11

-54C

Question 12

Max fuel temp

Answer 12

52C

Question 13

Max vibration for low pressure spool

Answer 13

1. 8 IPS

(4) Vibration in Amber range below 2.5 IPS is time limited to 5 min for take off phases. 10 sec. For all other phases

Question 14

Max vibration on high pressure spool

Answer 14

1. 1 IPS

(4) Vibration in Amber range below 2.5 IPS is time limited to 5 min for take off phases. 10 sec. For all other phases