EMC Chapter 9 Flashcards
The amount of ___ induced in a coil is determined by the rate at which the coil is rotated in a magnetic field.
voltage
Field windings are electromagnets used to produce the ___ field in a generator.
magnetic
A disadvantage of permanent magnets is that their magnetic lines of force ___ as the age of the magnet increases.
decrease
A(n)___ is the movable coil of wire in a generator that rotates through the magnetic field.
armature
Although increasing the number of ___ reduces the ripples in the output voltage, it is impossible to remove the ripples completely.
coils
A ___ is a ring made of segments that are insulated from one another.
commutator
Commutators segments reverse the connections to the brushes every ___ cycle.
half
A brush is the sliding contact that rides against the commutator segments or slip rings and is used to connect the ___ to the external circuit.
armature
The pulsations of a DC generator’s output voltage are known as ___.
ripples
The ___ generator rule is the relationship between the current in a conductor and the magnetic field existing around the conductor.
left-hand
There are ___ types of DC generators.
three
The difference between the types of DC generators is based on the relationship of the ___ to the external circuit.
field windings
Because of their poor voltage regulation, ___-wound DC generators are not used frequently.
series
A shunt-wound generator is a generator that has its field windings connected in ___ (shunt) with the armature and the external circuit (load).
parallel
A ___-wound generator is a generator that includes series and shunt field windings.
compound