EMC Chapter 3 Flashcards
The 5S organization system is a workplace organization system that stands for sort, straighten, sweep, standardize, and ___.
sustain
Sharp-edged and pointed tools should be carried with the cutting edge ___ and away from the body.
down
Power tools should be inspected by a qualified person at regular intervals specified by the ___ or OSHA.
manufacturer
All power tools should be grounded unless they are an approved ___ design.
double-insulated
Always check for the presence of ___ before taking any measurements.
voltage
A ___ is a two-piece test instrument that includes a transmitter that is plugged into the receptacle.
branch circuit identifier
A ___ tester is a test instrument that tests for a complete path for current to flow.
continuity
A ___ tester is a device that is plugged into a standard receptacle to determine if the receptacle is properly wired and energized.
receptacle
A ___ tester is a device that indicates approximate voltage level and type (AC or DC) by the movement and vibration of a pointer on a scale.
voltage
A(n)___ is a meter that can measure two or more electrical properties and displays the measured properties along calibrated scales using a pointer.
analog multimeter
In most cases, diodes are tested with a(n)___.
digital multimeter
A(n)___ is a meter that can measure two or more electrical properties and displays the measured properties as numerical values.
digital multimeter
A(n)___ is a meter that measures the current in a circuit by measuring the strength of the magnetic field around a single conductor.
clamp-on ammeter
A(n)___ is a test instrument that provides a visual display of voltages.
Oscilloscope
A(n)___ is a special DC voltmeter that detects the presence or absence of a signal.
digital logic probe