Electronic Key System Components Flashcards
on a 6P6c RJ 11 type outlet, the pins ________ are used
3 and four
can hard keys be alterded
no
List three ways to mount the system
wall mount
free standing
rack mount
DID
Direct inward dialing
Centrex lines are best descirbed as
telephones which don’t need any equipment to work
Trunk Hunting patterns are programmed by the _______________
technician/installer
customers TELCO circuits terminate at the _________
D-mark
the most common type of __________ circuit used for EKS are the POTS lines
Telco
most systems _______ digital telephones from other systems to be used provided the correct programming is used
do not allow
can soft keys be altered
yes
what is used to maintain system programming in the event of a system failure
CPU battery
what is the voltage used in an automatic ring down circuit
-48VDC
Most New EKS use ______pair to operate analog or digital telephones
1
OPX
off premises extension
WATS
wide area telephone service
The __________houses the system components, cables, and power supply to operate all telephones and trunks
KSU
The EKS comes with default programming ________ to the customer requirements
customized
open_______ systems allow cards to be installed and monitored using LEDs for status
architecture
the most common type of telco circuit used for EKS are the ______lines
POTS
