Duality Cue and FX

Question 1

FX 1-4 are _____ and may not be switched.

Answer 1

post-fader

Question 2

Cue ST is _____ by default but can be switched to _____.

Answer 2

pre-fader, post-fader

Question 3

Pre-fader is for _____, while post-fader is for _____.

Answer 3

cue sends, FX

Question 4

What two systems can Cue ST feed to separately, but not together on the same channel?

Answer 4

Cue A or Cue B

Question 5

What can Cue A and Cue B be thought of as?

Answer 5

sub-mixes that can be combined either in Foldback A/B or in the HearBack Pro mixers

Question 6

What are mini mixers that combine signals together for the headphone mix?

Answer 6

Foldback A and B

Question 7

What features do Foldback A/B contain?

Answer 7

• hi and lo EQ
• 6 source selections
• two mix levels
• one main level
• cut and AFL

Question 8

_____ and _____ typically feed their associated aux masters.

Answer 8

FX 1-4 and Cue ST

Question 9

Where can the aux masters be assigned?

Answer 9

Foldback A or B

Question 10

Where do the aux masters directly go, if not assigned?

Answer 10

patchbay

Question 11

What does EFX do?

Answer 11

allows you to disconnect one of the aux sends on a channel from its associated master

Question 12

What are the steps to route EFX to CHOP to add more possible sends during mixdown?

Answer 12

1. ) hold set EFX/Cue B on channel(s)
2. ) press the send knob until EFX lights up, then press the knob to turn it on
3. ) select the channel
4. ) press EFX under the Channel Output assignment
5. )patch the channel output to the desired effects unit

Question 13

What are the steps to route Cue ST to the track buses to add more sub-mixes for more of me mixers?

Answer 13

1. ) hold set EFX/Cue B
2. ) press the send knob until EFX lights up, then press the knob to turn it on
3. ) select the channel
4. ) set EFX TO TRK in central routing (buses on the TFT will turn green)
5. ) select the desired bus(es) for the mix
6. ) patch “MIX BUS OUTPUTS” to more of me mixer