Drawing Interpretation Flashcards
The type of line used to show an alternate position of an object is a A) Phantom line B)Hidden line C)Section line D) Leader line
A) Phantom line
A break line is used to A)Show where a piece is to be cut B)Show where pieces are to be welded C)Conserve space on the drying D) Show the location of a surface area
C)Conserve space on the drying
The two main types that are usually together are A)Leader lines an object lines B)Visible lines an object lines C)Leader lines in section Lines D) Dimension lines and extension lines
D) Dimension lines and extension lines
A line that may be used for dimensioning or adding a note is a/an: A)Extension line B)Section line C)Break line D) Leader line
D) Leader line
Lines used on a drawing to show the shape or outline of an object are called A)Object and hidden lines B)Object and dimension lines C)Visible and viewing plane lines D) Viewing plane and hidden lines
A)Object and hidden lines
A cut surface is highlighted by using A)A cutting plane line B)Leader lines C)Break lines D) Section lines
D) Section lines
Cutting plane line is used to identify A)Developed view B)Revolved section C)Sloped surface D) Section view
D) Section view
Who is responsible for preparing a set of plans for a welded structure A)The customer B)The employer C)The engineer D) The draftsman
C)The engineer
What is the main purpose of a drawing or blue print
A)To keep the engineers design in the office
B)To ensure the engineer is present during fabrication
C)To provide communication to the draftsman
D) To provide communication to the shop fabricator
D) To provide communication to the shop fabricator
Which working drawing would provide you with information on the size of C shape used in the construction of the buildings roof A)Architectural drawing B)Structural drawings C)Mechanical drawing D) Electrical drying
B)Structural drawings
Which term describes a set of written instructions that are necessary to complete a particular job A)Specifications B)Weldments C)Draftsman D) Blueprints
A)Specifications
Leader lines are used to A)Save space on a drawing B)Point directly to a surface C)Show an alternate position of a part D) Show the visible shape of an object
B)Point directly to a surface
An object line is a line that
A)Shows edges and outlines not visible to the eye
B)Shows the visible shape of a part
C)Has an arrow on one end and points to a surface
D) Locate the centre of holes or slots
B)Shows the visible shape of a part
A broken line of medium thickness is called a A) Hidden line B)Centreline C)Phantom line D) Extension line
A) Hidden line
Which statement describes a central line
A)Find straight line with an arrowhead at one and usually drawn at an angle
B)Series a fine lines, solid or solid and broken, arranged in a specific pattern
C)Fine, broken line made up of of a series of short and long dashes alternately spaced
D) Sick, broken line made up of a series of short and long dashes alternately spaced
C)Fine, broken line made up of of a series of short and long dashes alternately spaced
