Drager X-am 2500

Question 1

How long is the drager sensor warm up period

Answer 1

5 minutes

Question 2

To operate the back light

Answer 2

press the +M button for 3 seconds, it will backlight for 10 seconds

Question 3

What battery does the drager use

Answer 3

nickel hydride

Question 4

The drager does not charge on the x-dock station

Answer 4

true

Question 5

what does blinking red light in dock indicate

Answer 5

charging

Question 6

what does solid red light indicate

Answer 6

fully charged (takes about 4 hours)

Question 7

What gases are used to callibrate the drager

Answer 7

methane and pentane

Question 8

If the Drager fails a bump test

Answer 8

removed and repeat test, then call haztech if it fails again

Question 9

02 sensor A1/A2

Answer 9

A1= 19.5
A2= 23.5%

Question 10

LEL sensor A1/A2

Answer 10

A1= 10%
A2= 20%

Question 11

CO sensor A1/A2

Answer 11

A1= 25 ppm
A2= 50 ppm

Question 12

H2S sensor A1/A2

Answer 12

A1= 10 ppm
A2= 15 ppm

Question 13

To silence A1 alarm

Answer 13

press OKon once

Question 14

A2 alarms

Answer 14

signal IDLH and to evacuate immediately
- It cannot be acknowledged

Question 15

An X symbol in the top right of the display indicates an error

Answer 15

Press OKon for 3 seconds and a error code will be displayed, dealing with error codes is beyond the scope of 472 operations