Dial it in #8 Flashcards
What is the forward position on the chainsaw?
Brake
What is the basic command organizational structure?
Strategic Level
Tactical Level
Task Level
Where should the primary survey start?
The area most affected
How to search multistory buildings?
- Closest to fire
- Above and below fire floors
- Higher floors then lower floors
Who are company officers?
Captains and LT’s
For PPA an exhaust opening must be made before fan turned
True
What is the PPA exhaust to intake ratio?
1:1
What type of pressure will stop contaminants from entering mask?
Positive pressure
What do we test for on SCBA checks step 1?
Negative Pressure
What are three things to check after a knot?
Dress set safety
Dry fold is also known as
Accordian Load
What is the minimum temp to which air is heated to start self combustion?
Autoignition temp
When fuel and 02 encounter an external heat source
Piloted Ignition
What happens when heat source pyrolizes fuel, creates gas, gas mixes with o2, and gases ignite and create fire?
flaming combustion
What is missing from the appliance kit?
reducer
What are hose appliances?
A device used to control the flow of water
Smooth boar nozzles create what type of stream?
Solid
Co-axial nozzles (the bumper) create what types of stream?
straight and fog
What is a reverse and forward lay?
Reverse; Fire to hydrant
Forward; Hydrant to fire
What is the steamer port
the front of the hydrant
What are specialty nozzles
19mm Forestry, exposure, ram piercing
Where are hard suction hoses found?
Tenders
What is the name of the load in the bumper line?
Scorpion
Attack lines on the engine use what pressure?
400 psi
What two streams does the blitzfire use?
solid and fog streams
What are two staging positions used by CFD ?
Inline and fend off
What is the length of the taper
9 m
length of the apparatus
At a minimum, ladders should be cleaned
the first sunday of every month
What class is a wet chem fire extinguisher
Class k
Material class D fire extinguishers are used for
Magnesium
