Documents Gov Welding Inspect And Qual Ch 5

Question 1

Which of the following do not contain job quality requirements?

a. codes
b. drawings
c. specifications
d. textbooks
e. Standards

Answer 1

d. textbooks

Question 2

Of the following, which may he considered mandatory?

a. codes
b. specifications
c. standards
d. all of the above
e. none of the above

Answer 2

d. all of the above

Question 3

The job documents that best describe the size and configuration of a weldment are:

a. codes
b. standards
c. specifications
d. drawings
e. none of the above

Answer 3

d. drawings

Question 4

The type of document that has legal status by definition is:

a. code
b. standard
c. specification
d. both a and b above
e. all of the above

Answer 4

a. code

Question 5

The type of document that describes the requirements for a particular material or component is referred to as:

a. code
b. standard
c. specification
d. a and b
e. b and c

Answer 5

e. b and c

Question 6

Something set up and established by authority as a rule to measure quantity, quality, value,
weight, etc.
a. specification
b. standard
c. code
d. drawing
e. none of the above

Answer 6

b. standard

Question 7

Of the following types of documents, which have general acceptance in the welding industry?

a. contracts
b. standards
c. specifications
d. drawings
e. all of the above

Answer 7

e. all of the above

Question 8

The code that covers the welding of steel structures is:

a. ASME Section IX
b. ASME B31.1
c. API 1104
d. AWSD1.l
e. ASME B31.3

Answer 8

d. AWSD1.l

Question 9

The code that covers the design of metallic unfired pressure vessels is:

a. ASME Section XI
b. ASME Section VIII
c. ASME Section X
d. API 1 104
e. AWSD1.1

Answer 9

b. ASME Section VIII

Question 10

The series of specifications covering the requirements for welding electrodes is designated:
a. AWS D1.X
b. AWS D14.X
C. AWS A5.1-A5.31
d. ASTMA53
e. ASTMA36

Answer 10

C. AWS A5.1-A5.31

Question 11

Which of the following methods for controlling materials in a fabrication shop, is most suitable for automation?

a. color coding
b. alpha-numeric coding
c. heat number transfer
d. bar coding
e. segregation by alloy

Answer 11

d. bar coding

Question 12

Which Section of the ASME Code covers qualification of welders?

a. SectionV
b. Section XI
c. Section III
d. Section VIII
e. Section IX

Answer 12

e. Section IX

Question 13

Tolerances are required on drawings to:

a. guide the inspector on permissible size variations
b. show the total amount of variation permitted from the design size
c. both a and b above
d. none of the above

Answer 13

c. both a and b above

Question 14

Tolerances can be expressed:

a. as a variation between limits
b. as plus or minus dimension
c. as a design size with either a plus or a minus
d. all of the above
e. none of the above

Answer 14

d. all of the above

Question 15

Drawing notes can be classified as:

a. general
b. local
c. specifications
d. all of the above
e. none of the above

Answer 15

d. all of the above

Question 16

Hold points refer to:

a. the points for lifting an object
b. a delay in fabrication to permit inspection
c. a shutdown at the end of the day
d. none of the above

Answer 16

b. a delay in fabrication to permit inspection

Question 17

The welding inspector is not responsible for checking to make sure all welding and testing personnel have adequate certifications.

a. true
b. false

Answer 17

b. false

Question 18

The American Welding Society has developed how many welding codes?

a. one
b. two
c. three
d. Six
e. Nine

Answer 18

e. Nine

Question 19

When inspecting unfired pressure vessels to the ASME Code, the inspector will usually use several different Sections.
a. true
b. false

Answer 19

a. true

Question 20

What Section of the ASME Code are the filler materials found?

a. Section III
b. Section II, Part C
c. Section II, Part D
d. Section IX
e. none of the above

Answer 20

b. Section 11, Part C

Question 21

Standards are never considered mandatory.

a. true
b. false

Answer 21

b. false

Question 22

Base metals used in fabrication can be bought per which of the following?

a. ASTM Standards
b. ASME Code, Section 11, Parts A and B
c. it is not required to specify base metals
d. a and b above
e. none of the above

Answer 22

d. a and b above

Question 23

The AWS Specifications designated as A5.XX refer to:

a. filler metals
b. rules for bridges
c. cross country pipelines
d. pressure vessel fabrication
e. none of the above

Answer 23

a. filler metals

Question 24

An effective materials control system will:

a. be as simple as possible
b. contain checks and balances
c. not be necessary unless the fabrication is for nuclear work
d. be based on ‘first in - first out’
e. a and b above

Answer 24

e. a and b above

Question 25

UNS refers to: a. United Nondestructive Society b. United National Standards c. Unified National System d. Unified Numbering System e. none of the above

Answer 25

d. Unified Numbering System

Question 26

Who is normally responsible for the qualification of welding procedures and welders? a. welder b. architect c. welder's employer d. engineer e. Code body

Answer 26

c. welder's employer

Question 27

Which of the following processes is not considered prequalified in accordance with AWS D1. 1? a. shielded metal arc b. submerged arc c. short-circuiting transfer gas metal arc d. spray transfer gas metal arc e. flux cored arc

Answer 27

c. short-circuiting transfer gas metal arc

Question 28

Of the following types of test specimens, which is used by API and not ASME for procedure and welder qualification testing? a. face bend b. root bend c. side bend d. nick break e. tensile

Answer 28

d. nick break

Question 29

What is the pipe welding position where the pipe remains fixed with its axis horizontal, so the welder must weld around the joint? a. 1G b. 2G c. 5G d. 6G e. none of the above

Answer 29

c. 5G

Question 30

What is the pipe welding position where the axis of the pipe lies fixed at a 45-degree angle? a. 1G b. 2G c. 5G d. 6G e. none of the above

Answer 30

d. 6G

Question 31

What is the pipe position test for welders who are trying to qualify to weld T, K, and Y connections? a. 1G b. 2G c. 5G d. 6G e. 6GR

Answer 31

e. 6GR

Question 32

If a welder qualifies to weld with an E6010 electrode, which is an F3 group electrode, he is also qualified to weld with all of the following except: a. E6011 b. E6012 c. E7018 d. E7024 e. E6013

Answer 32

c. E7018

Question 33

With relation to procedure and welder qualification, which of the following can be an important task for the welding inspector? a. watching the welding qualification test b. identifying samples c. cutting and testing specimens d. monitoring production welding e. all of the above

Answer 33

e. all of the above

Question 34

For most codes, if a welder continues to use a particular process and procedure, how long does qualification remain in effect? a. indefinitely b. 6months c. 1 year d. 3 years e. until he produces a rejectable weld

Answer 34

a. indefinitely