Definitions & General Rules

Question 1

According to the CE Code, when shall the application for inspection be filed?

A) when all the work is completed
B) At the time the permit is obtained
C) Prior to any electrical work being concealed

Answer 1

B)
2-006

Question 2

According to CE Code, under what circumstances can the inspection department perform a re-inspection?

A) Only if a problem is reported after a job has passed a previous inspection.
B) When it considers the action to be necessary.
C) After the code has been updated.

Answer 2

B)
2-020

Question 3

Which of the filling does the CE Code NOT require to be marked on electrical equipment?

A) The year it was manufactured.
B) The type of voltage to be connected to it.
C) The speed at which the rotating equipment rotates.

Answer 3

A)
2-100

Question 4

Which of the following types of electrical equipment may have a branch circuit rating that exceeds 150 volts-to-ground when installed in an apartment building?

A) Motors
B) Welders
C) Air conditioners

Answer 4

C)
2-110 c)

Question 5

What marking is required to conductors or cables that will be exposed to direct rays of the sun?

Answer 5

Sunlight resistant
2-136 2) a)

Question 6

What is the minimum headroom allowed in an electrical room containing motor control centres?

Answer 6

2.2 m
2-308 5)

Question 7

What type of receptacle must be installed to plug in the tools necessary for the maintenance of rooftop equipment on an apartment building?

Answer 7

5-20R
2-316 b)
26-710 c)

Question 8

Which designation of enclosure can be used where it may be subject to direct streams of water?

Answer 8

4
2-400 1) d)

Question 9

What marking is acceptable on a totally enclosed motor?

Answer 9

TE
2-404 1) c)