Daily Apparatus Check

Question 1

Weekly check:

5.Backflush the pump for one minute by attaching a ___double female to a discharge with a ____inch pony line to hydrant.

Answer 1

2 1/2 inch

Question 2

On truck 74 the waterway shall be wiped with ______ ______ fluid. All sections shall be wiped down with a soft rag except for the last section. All the waterway sections collapse into the fly section and there is no need to lube the outside of the fly section.

Answer 2

Automatic transmission fluid

Question 3

On truck 74 Do you grease ladder including climbing ladder with ______quickpeel gel heavy duty citrus solve degreaser followed by pressure washing.

Answer 3

Drummond

Question 4

On truck 74 after degreasing clean entire ladder with _____ _____all purpose cleaner applied with a pump sprayer followed by a second pressure wash.

Answer 4

Simple green

Question 5

On truck 74 measurement should be _____inch from bottom lateral to top of cable

Answer 5

1 1/4 inch

Question 6

What kind of Grease do you use for truck 74.

Answer 6

Pro1One only

Question 7

On truck 74 grease the following with Pro1One only:

Answer 7

Windsmith
Turntable ring gear
Turn table zerk fitting right passenger side. Pump grease continuously while rotating turntable 360°. Once 360° rotation is complete while pumping grease, continue with an additional 360° rotation while not pumping grease.
Right and left side pivot shaft bearings, grease and until grease comes out latter must be elevated to 90°.
Grease Zerk fittings on platform. There are four fittings on each side of the platform there are two fittings on the swivel. There are two fittings on both leveling cylinders per side. These fittings only get a half pump each from the grease gun.
Grease both Turret guns with half pump from grease gun.