Current Electricity Flashcards
TRUE OR FALSE: Resistance of a wire decreases as its cross-sectional area decreases.
FALSE: as the area gets smaller, the resistance gets larger.
TRUE OR FALSE: A 9V battery means that the electrons have 9V of current.
FALSE: it means it has 9V of potential difference.
TRUE OR FALSE: Two examples of resistors or loads would be light bulbs and switches.
FALSE: light bulbs and heaters. (can have multiple answers)
TRUE OR FALSE: Electrons carry energy from the battery through the load(s) and return any excess energy to the battery.
FALSE: all energy goes into the load. the battery gives energy to the electrons,, so there is no excess energy.
TRUE OR FALSE: when the switch is open electricity does not flow because it is a short circuit.
FALSE: there is no path for the electricty to flow through. (the circuit is incomplete)
TRUE OR FALSE: The units that make up the amp are volts divided by ohms.
TRUE.
TRUE OR FALSE: Potential difference is measured with a voltmeter.
TRUE.
TRUE OR FALSE: Most house wires have a plastic or rubber coatinng because they are excellent insulators.
TRUE.
TRUE OR FALSE: Loads are designed to decrease resistance so electrical energy can be changed into other kinds of energy.
FALSE: loads are designed to add more resistance.
Parts of a Circuit:
- Source (Alternating vertical lines)
- Wires (Connecting lines)
- Switch (Can be opened or closed)
- Load/Resistor (Light, Motor, Anything else= squiggle)
- Fuse (horizontal S, kind of)
Where do electrons move?
From the start of the source all the way back. It returns with no more energy.
OHM’S LAW EQUATIONS:
V = I x R
I = V/R
R = V/i
The Different Meters (3):
Voltmeter = Potential Difference
Ammeter = Current
Ohmmeter = Resistance
What is V?
- Potential difference (Voltage)
- Amounts of energy (Batteries, etc.)
- Volts (V)
- Needs to hug whats testing. (source)
What is I?
- Current
- # of electrons moving
- Measured in amps (A, ampere)
What is R?
- Resistance
- Measured in ohms (Horseshoe like)
- How the load turns electrical energy into other forms of energy
If the current is too high, there is danger of a fire starting.
- This is because there are too many electrons pushing to get thrugh the wire. = Heat up = Fire = Explosion