COMMUNICATIONS

Question 0

90) If RMP1 fails:
a. VHF1 can be tuned by RMP2 only.
b. VHF1 can be tuned by RMP2 and RMP3.
c. VHF1 cannot be tuned.

Answer 0

b. VHF1 can be tuned by RMP2 and RMP3.

Question 1

89) To extinguish the SELCAL light on VHF2 the captain must:
a. Select the VHF2 transmission key.
b. Select the ON VOICE pb.
c. Push the RESET push button.

Answer 1

c. Push the RESET push button.

Question 2

91) RMP1 can tune:
a. VHF1 and VHF2 only.
b. VHF1 only.
c. Any VHF.

Answer 2

c. Any VHF

Question 3

92) With the Audio Switching selector in CAPT ON 3 position:
a. The captain can only receive on VHF3.
b. The FO radio is unusable.
c. The captain uses his acoustic equipment and the third occupant ACP.

Answer 3

c. The captain uses his acoustic equipment and the third occupant ACP.

Question 4

93) The CIDS provides for:
a. Long range HF communication.
b. Public address announcements.
c. Communication with the mechanic in the nose wheel well.

Answer 4

B.

Question 5

94) If CIDS is lost, which of the following will be inoperative?
a. PA System and cabin / cockpit interphone.
b. Communications with mechanic in the nose wheel well.
c. SELCAL system.

Answer 5

A.

Question 6

95) To enable communication with a mechanic at the number 2 engine during manual start valve operation, the pilot must:
a. Select INT on the INT/RAD switch and the INT reception knob.
b. Select the CAB transmission key and the reception knob.
c. Relay with a second mechanic at the nose wheel well.

Answer 6

B