Comm electric fire

Question 1

If an evacuation is initiated from the cabin, what indications would we have on the flight deck?

Answer 1

The EVAC light flashes red and the horn sounds

The signal will only last 3 sec

Question 2

If your ACP failed, how would you communicate?

Answer 2

On the audio switching panel, turn the selector Captain or FO 3 then use a acoustic equipment and the third ACP

Question 3

AC bus 1 just failed. Will the AC ESS bus remain powered?

Which bus supplies the AC ESS BUS in this condition?

Answer 3

Yes

AC bus 2

Question 4

What does the AC essential Fault light represent?

Answer 4

Illuminates with an amber Ecam caution message when the AC ESSBUS is not powered.

Question 5

What does Fault light in the IDG 2 push button represent?

Answer 5

Illuminated with an Ecam message if:

The IDG oil outlet overheats

The IDG oil pressure is low

Question 6

For an engine fire system test, what indications are we looking for in the cockpit?

Answer 6

Continuous repetitive sound
The master warning light flash
Engine 1 (2) fire warning on Ecam
Fire engine push button illuminates red
Squib lights illuminates white if discharge supplies are available
Disch lights illuminate amber 
Fire lights on ENG panel illuminates red

Question 7

What automatically occurs if you have an APU fire while on the ground?

Answer 7

The APU shits down automatically and the extinguisher agent discharges

Question 8

What does the amber discharge 1 light means?

Answer 8

Illuminates amber when the bottles has low pressure

Question 9

What occurs when the rack power is selected off

Answer 9

Power is removed from the aft Avionics rack

WADL CM Live tv and CM satellite Radio system completely shut off.