Chp 10 Printers Flashcards
Laser Printing Process Step 1
Processing
Laser Printing Proces Step 2
Charging
Laser Printing Process Step 3
Exposing
Laser Printing Process Step 4
Developing
Laser Printing Process Step 5
Transferring
Laser Printing Process Step 6
Fusing
Laser Printing Process Step 7
Cleaning
All the Laser Printing Steps
1 Processing 2 Charging 3 Exposing 4 Developing 5 Transferring 6 Fusing 7 Cleaning
Laser Printer Parts
Imaging Drum Developer Fuser Assembly Transfer Belt or Transfer Roller Pickup Rollers Paper Separation Pad Duplexing Assembly
Laser Printer Imaging Drum
Applies page image to transfer belt or roller
Laser Printer Developer
Pulls toner from toner supply and sends it to the imaging drum
Laser Printer Fuser Assembly
Fuses the page image to the paper
Laser Printer Transfer belt or Transfer Roller
Transfers the page image from the drum to the page
Laser Printer Pickup Rollers
Picks up Paper
Laser Printer Paper Separation Pad
Enables pickup rollers to pick up only one sheet of paper at a time
Laser Printer Duplexing assembly
An assembly that switches paper from the front to the back side so that the printer can print on both sides of the paper
Laser Printer (Processing)
The printer’s raster image processing engine receives the page, font, text, and graphics data from the printer driver, creates a page image, and stores it in memory.
Laser Printer (Charging)
The cylinder-shaped imaging drum receives an electrostatic charge of –600Vdc (DC voltage) from a conditioning roller.
Laser Printer (Exposing)
A moving mirror moves the laser beam across the surface of the drum. As it moves, the laser beam temporarily records the image of the page to be printed on the surface of the drum by reducing the voltage of the charge applied by the charger corona to –100Vdc.
Laser Printer (Developing)
The drum has toner applied to it from the developer; because the toner is electrostatic and is also at –600Vdc, the toner stays on only the portions of the drum that have been reduced in voltage to create the image.
Laser Printer (Transferring)
While the sheet is being fed into the printer, it receives an electrostatic charge of +600Vdc from a corona wire or roller; this enables it to attract toner from the drum.
Laser Printer (Fusing)
The printed sheet of paper is pulled through fuser rollers, using high temperatures to heat the toner and press it into the paper.
Laser Printer (Cleaning)
To prepare the drum for a new page, the image of the preceding page placed on the drum by the laser or LED array is removed by a discharge lamp. Toner that is not adhering to the surface of the drum is scraped from the drum’s surface for reuse.
Laser Printer
A page printer that stores the entire contents of the page to be printed in its memory before printing it.
Inkjet Printer
Spray controlled dots of ink onto the paper to form characters and graphics from a tightly spaced group of nozzles.
Thermal Printer
Uses heat transfer to create text and graphics on the paper.
Impact Printer
Uses a mechanical print head that presses against an inked ribbon to print characters and graphics.