Chapters 2, 3, & 4 Flashcards
________ percent of all agriculture-related injuries occur while using farm machinery.
23
37
44
50
44
Most of these accidents and injuries can be prevented though the development of safe work ________.
policy
rules
habit
habit
Which color:
is used to signify all work areas and usable machinery?
Red
Orange
Yellow
Green
Purple
Gray
White
Blue
Grey
Which color:
Color used to signify radioactivity?
Red
Orange
Yellow
Green
Purple
Gray
White
Blue
Purple
Which color:
used as a background color if information is to be provided?
Red
Orange
Yellow
Green
Purple
Gray
White
Blue
Blue
Which color:
Color used to signify danger?
Red
Orange
Yellow
Green
Purple
Gray
White
Blue
Red
Which color:
Color used to mark off areas where machine hazards are likely?
Red
Orange
Yellow
Green
Purple
Gray
White
Blue
Orange
Which color:
Indicates the area of safety equipment such as a first aid kit?
Red
Orange
Yellow
Green
Purple
Gray
White
Blue
Green
Which color:
the color used to designate caution?
Red
Orange
Yellow
Green
Purple
Gray
White
Blue
Yellow
Which color:
This color stripes are used to mark traffic pathways within the shop?
Red
Orange
Yellow
Green
Purple
Gray
White
Blue
White
What percent of all accidents in the shop occur to the arms and hands?
36%
10%
25%
36%
What percent of all injuries occur to the body?
36%
10%
25%
25%
What percent of accidents occur to the head?
36%
10%
25%
10%
Safety ______________ should always be worn in the shop
shoes
pants
glasses
contact lens
glasses
Shop clothing should also be _________ and be tough enough to protect the body from scrapes and abrasions.
cotton
bullet proof
fire resistant
No special clothing necessary
fire resistant
__________ shoes with steel reinforced toes provide excellent protection.
Canvass
Rubber
Leather
Open toed
Leather
Gloves can be both protective devices and ________________ in the shop.
required
recommended
not necessary
safety hazard
safety hazard
Fire occurs only when three factors are combined. These are fuel, _________, and heat.
hydrogen
methane
propane
oxygen
oxygen
Electrical equipment fires can be extinguished with?
Which fire extinguisher symbol:
Green Triangle
Red Square
“C” surrounded by a blue circle
Yellow star symbol with a D in the center
“C” surrounded by a blue circle
Combustible metal fires are extinguished by this fire extinguisher.
Which fire extinguisher symbol:
Green Triangle
Red Square
“C” surrounded by a blue circle
Yellow star symbol with a D in the center
Yellow star symbol with a D in the center
Used to designate fire extinguishers that can put out ordinary combustible fires.
Which fire extinguisher symbol:
Green Triangle
Red Square
“C” surrounded by a blue circle
Yellow star symbol with a D in the center
Green Triangle
Designates Class B fires which involve flammable liquids.
Which fire extinguisher symbol:
Green Triangle
Red Square
“C” surrounded by a blue circle
Yellow star symbol with a D in the center
Red Square
Which is the correct classification for the following?
Fires are termed as ordinary combustibles. These fires burn fuels such as wood, paper, and trash; they do not involve any liquid fuel or electricity.
Class A
Class B
Class C
Class D
Class A
Which is the correct classification for the following?
Fires that involve electrical equipment.
Class A
Class B
Class C
Class D
Class C
Which is the correct classification for the following?
Fires that involve combustible metals.
Class A
Class B
Class C
Class D
Class D
Which is the correct classification for the following?
Fires are those that utilize flammable liquids for fuel.
Class A
Class B
Class C
Class D
Class B
__________ fuels only in approved containers.
Store
____________ are used in areas of excessive dust.
Respirators
Purple is used to signify this.
Radioactivity
Clothing should be fire __________.
Resistant
Safety ___________ can be taken in the shop to prevent accidents.
precautions
Discourage ___________ in the shop.
horseplay
Keep all moving parts of machinery properly ___________.
shielded
Extinguishers that vary due to the types of fires:
fire
How much gap should there be between the grinding wheel and the work rest on a bench grinder?
1/16”
1/8”
1/4”
1/2”
1/8”
How much space should there be between the grinding wheel and the upper guard on the bench grinder?
1/16
1/8
1/4
1/2
1/4
True or False?
Once you set the proper gaps on the bench grinder, you won’t need to adjust them again until a new grinding wheel is installed.
False
Don’t forget the wheel wears down, so adjustments need to be made on a regular basis!
True or False?
It us best to remove the work rest on the bench grinder when using a wire wheel.
True
Your work may be pulled into the wire wheel is the work rest is in place creating a safety hazard.
What should you keep away while using a hand grinder?
Shop Wall
Grinder Guard
Flammables
Hand grinders are safe, so no precaution is necessary.
Flammable
Sparks and flammables create fire!
How can compressed air injure or kill you?
Burns the skin
Tears the skin
Put air bubbles in your blood stream
Air compressors are safe so no precautions are needed.
Put air bubbles in your blood stream
Why can arc welding without protective clothing injure your skin?
Cut and scrapes
Radiation burn from the radiation coming from the welding process
Arc welders are safe so no extra precautions are needed.
Radiation burn from the radiation coming from the welding process
If I don’t protect my eyes while using an arc welder, I might get ______________?
a headache
blurred vision
flash burn
Eye protection is not necessary while using an arc welder
flash burn
Which of the follow puts off toxic fumes while arc welding?
Mild Steel
Cast Iron
Galvanized Steel
Aluminum
Galvanized steel
The ____________ is the most useful of all woodworking machines.
band saw
drill press
circular saw
table saw
circular saw
When using a jack to lift heavy equipment, which of the follow rules should one follow?
Always block or use safety stands under the equipment in case of jack failure
Always block wheels so there is not chance of the equipment rolling off the jack
Both are good jack safety practices
Both are good jack safety practices
The ___________ is a useful wood cutting tool which has an endless blade traveling around two wheels.
table saw
band saw
circular saw
portable sander
band saw
The portable ________ saw is a combination of a circular saw and a power hand saw.
electric
power
band
circular
electric
The advantage of a __________ saw is that the work remains stationary when cross cutting, and the saw comes down onto the work instead of up into it.
band
circular
table
radial arm
radial arm
The __________ has a short blade that moves up and down, cutting only on the down stroke.
band saw
radial arm saw
jig saw
table saw
jig saw
The ___________ saw is simply a portable jigsaw.
band
sabre
lion
tiger
sabre
The _____________ is used to plane boards smooth to an even thickness.
belt sander
planer
router
sabre saw
planer
The ______________ is similar to a planer in that it is used to smooth a surface of a board.
belt sander
orbital sander
jointer
router
jointer
The _____________ is used to cut specialized shaped edges, moldings, and picture frame stock.
shaper
router
jointer
belt sander
shaper
The __________ is a portable shaper that moves over the work instead of the work being moved through the blade.
jointer
planer
shaper
router
router
Power __________ use abrasive paper or cloth that spins at high speeds to remove material from the project stock.
tools
routers
sanders
saw
sanders
The __________ is used to shape wood into various round, cylindrical shapes.
spindle sander
orbital sander
router
wood lathe
wood lathe
____________ are required on door jams and in specially built furniture.
dowels
wood glue
mortises
router
mortises
Use a ________________ to test the charge of the battery.
charger
hydrometer
jumper cables
voltage tester
hydrometer
The metal ______ is used to cut large pieces of sheet metal.
shear
The _____ holds and rotates the work while it is being shoped by a cutting tool that is fed against the work.
lathe
The ____ welding machine uses electric current to weld metal together.
arc
The oxyacetylene system combines _______ and acetylene gas to produce extreme heat that fuses the metal together.
oxygen
Coal _____ create very high temperatures to heat metal for shaping.
forges
_____ welding is known as resistance welding.
Spot
The bench _____ is a motor driven wheel made of various abrasives.
grinder
The ____ is used to polish metal.
buffer
The drill ________ is a stationary machine used to drill holes. If used with attachments it can also be used for boring, routing and mortising.
press
The portable _____ drill is used to drill holes into different material.
hand
The _______ machine is especially useful in cutting and shaping metal.
milling
A _______ is used to test the charge of a battery.
hydrometer
The _____ folder and the brake are used to bend and fold a variety of metal stock and to bend sheet metal.
bar
The ______ grinder and disk sander are useful tools for removing excess material from objects.
portable
A dead blow hammer has it’s head filled with lead shot and ___________________.
water
Oxygen
Oil
grease
oil