Chapter 8 Flashcards
You should use a wooden __________ when attempting to drive a handle to hammer or axe.
Tool head
Vise
Wedge
Mallet
Mallet
A large ________ is used to drive remaining wood out of tool head.
Rivet
Vise
Wedge
Punch
Punch
When attaching handles to hammers and axes, a proper fit has been achieved when head comes to a rest ________ above the enlarged part of the handle.
1/4”
1/2”
1”
3/4”
1/2”
Cracked or split handles can be often be repaired by using _________ glue.
Hot
Super
Elmers
Wood
wood
What oil is used to seal the fit of the handle and preserve the wood?
Linseed Oil
Peanut Oil
Canola Oil
Sunflower Oil
Linseed Oil
When removing an old or broken handle from shovel or rake, you should grind off head of the _______ that holds the handle and use a drift punch to remove it.
vise
mallet
wedge
rivet
rivet
What size bit is used when removing the old or broken handle from hammer or axe?
Both 1/4” and 3/8”
3/8”
1/4”
None of the above
Both 1/4” and 3/8”
When attaching a handle to a hammer or axe, use a wood rasp to shape the end of the handle to fit the tool __________.
vise
chisel
head
rivet
head
True or False?
Properly fitted handles reduce risk of injury to the worker and to those around the worker that can be caused by flying tool handles.
True
If your file has a large tang, the best fuel source for heating the tang is _________________ gas,
butane
MAPP
propane
nitrogen
MAPP
When heating the tang for burn handle installation, the metal should be heat to ___________ color.
blue
orange
red
violet
red
Match the gas to the correct flame temperature.
Propane:
2600
3600
3700
3600
Match the gas to the correct flame temperature.
Butane:
2600
3600
3700
2600
Match the gas to the correct flame temperature.
MAPP:
2600
3600
3700
3700
The narrow part of the file where the handle is installed is the ______________________.
rasp
tang
none of the above
handle
tang
