Chapter 6: Welding And Nondestructive Examination Symbols Flashcards
The primary element of any welding symbol is referred to as the:
Reference line
Information appearing above the reference line refers to the:
Other side
The graphical representation of the type of weld is called the:
Weld symbol
Which of the symbols below represents the weld shown?
A
When a weld symbol is centered on the reference line, this indicates:
There is no side significance
The symbol below depicts what type of weld?
Flare-bevel-groove
In the symbol below, the 1/8 dimension refers to what?
Root opening
In the symbol below, the 3/4 dimension refers to what?
Depth of preparation
If applied to a 1 inch thick weld, the symbol below represents what type of weld?
Full penetration double-bevel-groove weld
Dimension appearing to the left of the weld symbol generally refer to the:
Weld size and depth of preparation
A triangular-shaped weld symbol represents what type of weld?
Fillet weld
The symbol below represents what type of weld?
Chain intermittent fillet weld
Dimensions appearing to the right of the weld symbol generally refer to the:
Weld length/pitch
A weld symbolized by a rectangular box that contains a dimension represents a:
Partially filled plug weld
The required spot weld size can be shown as:
A dimension of the required nugget diameter/ a value for the required shear strength
A number appearing to the right of the spot weld symbol refers to:
Pitch distance between adjacent spots
In the symbol below, the symbol shown on the other side represents:
Melt-through weld
The symbol below shows the use of what type of weld?
Single-V-groove weld/ backing weld
The symbol below shows what type of groove configuration?
Scarf
The part of the welding symbol which can be used to convey any additional information which cannot be shown otherwise is referred to as:
The tail
The symbol below shows what type of weld?
Gas tungsten arc seam weld
What nondestructive examination method is to be applied to the arrow side?
Magnetic particle testing