Brainscape's Knowledge GenomeTM

Browse over 1 million classes created by top students, professors, publishers, and experts.


See full index

2022 - Building Construction Related to the Fire Service - JDS > Chapter 3 - The Way Buildings are Built: Structural Design Features > Flashcards

Chapter 3 - The Way Buildings are Built: Structural Design Features Flashcards

1
Q

What are some of the sources loads arise from?

A

gravity, wind, earthquakes, and soil pressure

p72

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

_______ creates a force on a building through the weight of the building components and all its contents.

A

Gravity

p72

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

Force acting to draw an object toward the earth’s center; force is equal to the objects weight.

A

Gravity

p72

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

When air is in motion, it possesses _______ _______ according to the following fundamental relationship.

A

kinetic energy

p73

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

Forces of wind on a building:

  • ________ ________ - the impact effect the wind has on a surface. This force may be reduced by streamlining the surface encountered
A

Direct pressure

p73

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

Forces of wind on a building:

  • __________ ______ - when wind encounters an object its fluid nature causes it to flow around the object. This exerts a drag effect on the object.
A

Aerodynamic drag

p73

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

Forces of wind on a building:

  • ________ ________- a suction effect produced on the downwind side of the building resulting in an outward pressure.
A

Negative pressure

p73

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

The energy possessed by a moving object is ?

A

Kinetic Energy

p73

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

Secondary effects produced by the wind:

  • _______ _______ - a back and forth effect due to variations in the velocity of the wind
A

Rocking effects

p73

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

Secondary effects of the wind:

  • ________ - wind passing over a surface such as a roof may cause _______ of the surface depending on the velocity of the wind and the harmonic characteristics of the surface.
A

Vibration / vibration

p73

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

Secondary effects of the wind:

  • _____-____ _____ - the tendency of wind to dislodge objects from a building
A

Clean-off effect

p73

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

Earthquakes can cause vibrational motion of the surface that subjects buildings to forces known as ______ ______ that can be very destructive, as history has shown.

A

seismic forces

p75

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

________ forces are produced in a structural member when it is twisted

A

Torsional

p76

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

________ forces are movements of relatively large amplitude resulting from a small force applied at the natural frequency of a structure

A

Resonant

p76

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

Soil _________ occurs where the soil is of a loose, sandy nature and is saturated with water.

A

liquefaction

p77

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

The tendency of a body to remain in motion or at rest until it is acted upon by force is called ?

A

Inertia

p77

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

Buildings with geometric ___________ are inherently more susceptible to damage from earthquakes than buildings having a __________ design.

A

irregularities / symmetrical

p77

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q

To overcome the difference and possible damage due to height differences in sections of a building a ______ ______ can be designed into the structure between the two sections

A

seismic joint

p78

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
19
Q

One method to protect a building against earthquake forces is to increase a buildings stiffness through the use of _____ _____ and ______ ______.

A

shear walls and cross bracing

p78

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q

Earthquakes

Another method for increasing a buildings stability is to use continuous structures with a high degree of ___________ in their ____________ _________.

A

redundancy / structural frames

p78

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
21
Q

__________ ________ are typically installed at the connections between columns and beams, and they absorb energy as the structure begins to move.

A

Damping mechanisms

p79

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
22
Q

A structural element designed to control vibration is called ?

A

Damping Mechanism

p79

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
23
Q

The basic concept of _____ ________ is to isolate the building from horizontal movement of the earths surface.

A

base isolation

p79

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
24
Q
  • _________ ________ - Create a layer between the building and the foundation, which has a low horizontal stiffness
A

Elastomeric bearings

p79

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
25
Q
  • ________ _______ - make use of special plates sliding on each other (a less common method of building isolation)
A

Sliding systems

p79

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
26
Q

Like the forces caused by wind and earthquakes, the force generated by _____ pressure must be evaluated in the design process.

A

Soil

p79

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
27
Q

Soil exerts a _________ pressure against a foundation.

A

horizontal

p79

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
28
Q

The pressure exerted by the soil against the foundation is known as _______ _____ pressure.

A

active soil pressure

p79

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
29
Q

The force of the foundation against the soil is known as the _______ _____ pressure.

A

passive soil pressure

p79

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
30
Q

As the temperature outside a building changes, the structural members at the ________ of the building expand and contract.

A

periphery

p81

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
31
Q

Vibration can arise from sources within a building such as _________ _________.

A

rotating machinery
ex. blower motors for the ventilation system

p81

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
32
Q

Vibrations can also arise from sources outside a building such as the ?

A

passing of a freight train

p81

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
33
Q

________ can occur in wood structural members as the lumber dries over time.

A

Shrinkage

p81

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
34
Q

Shrinkage can result in ______ forces at connections between members.

A

tensile forces

p81

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
35
Q

The forces on a building resulting from gravity are classified into two types: ?

A

dead loads and live loads

p81

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
36
Q

A _____ _____ is the weight of any permanent part of a building.

A

dead load

p81

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
37
Q

A dead load has the characteristic of being fixed in ________ and accurately _______.

A

location / known

p81

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
38
Q

A ____ _____ is any load that is not fixed or permanent.

A

live load

p82

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
39
Q

Force placed upon a structure by the addition of people, objects or weather is called ?

A

Live load

p82

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
40
Q

Load that is applied at one point or over a small area ?

A

Concentrated load

p82

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
41
Q

____ and ____ can be considered live loads.

A

Rain and snow

p83

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
42
Q

The load exerted on a roof from the weight of snow is known as ?

A

Snow load

p83

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
43
Q

Frequently, the snow load calculated for a roof may be on the order of ____ to ____ pounds per square foot.

A

20 to 30 pounds per square foot

p84

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
44
Q

Water from fire fighting operations can add an additional ?

A

live load

p84

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
45
Q

A stream of water discharging 250 gpm introduces ______ pounds of water per minute.

A

2082 lbs

p84

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
46
Q

A water depth of 3 inches will impose a load of ____ pounds per square foot.

A

20.8 lbs

p84

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
47
Q

In addition to their origin, the loads applied to buildings may be classified as ______ or ________.

A

static or dynamic

p84

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
48
Q

Loads that are steady, motionless, constant, or applied gradually are called ?

A

Static Loads

p84

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
49
Q

The dead load of a building, the snow load and many live loads are ______ loads.

A

Static

p84

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
50
Q

Loads that involve motion are ?

A

Dynamic Loads

p84

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
51
Q

Examples of dynamic loads are ?

A

wind, moving vehicles, earthquakes, vibration, firefighters and falling objects

p84

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
52
Q

Dynamic loads differ from static loads in that they are capable of delivering __________ to a structure in addition to the _________ of an object.

A

energy / weight

p84

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
53
Q

Condition in which the support provided by a structural system is equal to the applied loads?

A

Equilibrium

p85

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
54
Q

The forces that resist the applied loads are known as ?

A

Reactions

p86

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
55
Q

A beam that is supported at one end is known as a ?

A

Cantilever beam

p87

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
56
Q

Projecting beam or slab supported at one end is a ?

A

Cantilever

p87

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
57
Q

Exterior loads can create different kinds of interior forces in materials and are classified according to the direction in which they occur in the material:

  • _________ tends to pull the material apart
  • __________ tends to squeeze the material
  • _____ tends to slide one plane of a material past an adjacent plane
A

Tension
Compression
Shear

p87

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
58
Q

The direction of the interior forces is important because the strength of materials varies with ?

A

direction

p87

59
Q

It is commonly recognized that wood has strength in the direction of its ______, which is different from the strength perpendicular to the ______.

A

grain / grain

p87

60
Q

A material such as _________ has good compressive strength but little tensile strength.

A

concrete

p87

61
Q

The magnitude of the interior forces that occur in structural members is evaluated by a quantity known as ______.

A

stress

p87

62
Q

Stress is a measurement of ______ _______ and is expressed as force units divided by the area over which the force is applied.

A

force intensity

p87

63
Q

Point at which material ceases to perform satisfactorily. Depending on the application this can be breaking, permanent deformation, excessive deflection or vibration.

A

Failure point

p88

64
Q

An ____ load is a load applied to the center of the cross-section of a structural member and perpendicular to that cross section.

A

axial

p88

65
Q

An _______ load is a load that is perpendicular to the cross section of the structural member but does not pass through the center of the cross section.

A

eccentric

p89

66
Q

A ________ load is offset from the center of the cross section of the structural member and at an angle to or in the same plane as the cross section.

A

torsional load

p89

67
Q

Structural member subjected to loads, usually vertical, perpendicular to its length ?

A

Beam

p90

68
Q

At the middle of the beam, a point known as the neutral axis, the tension and compression stresses are actually _____.

A

zero

p91

69
Q

_____ beams are capable of supporting greater loads than _____ beams, even if they have the same cross-sectional area.

A

Tall / short

p93

70
Q

Vertically supporting members are called ?

A

Columns

p93

71
Q

An _____ is a curved structural member in which the interior stresses are primarily compressive.

A

arch

p93

72
Q

______ can be thought of as flexible structural members that can be used to support roofs, brace tents, and restrain pneumatic structures.

A

Cables

p94

73
Q

A cable used to support loads over a great distance will assume the shape of a ?

A

parabola

p94

74
Q

______ are framed structural units made up of a group of triangles in one plane.

A

Trusses

p95

75
Q

Typical truss shapes are available to span distances of ___ to ___ feet, but in today’s construction truss spans in excess of ____ feet are not uncommon.

A

22 to 70 feet / 100 feet

p96-97

76
Q

Lightweight wood or metal trusses, known as truss joist, have become very common in ______ construction, taking the place of solid joists.

A

floor

p97

77
Q

Lightweight wood trusses are also commonly used in _____ construction.

A

roof

p97

78
Q

From a fire fighting standpoint, trusses have the potential for early ?

A

failure under adverse conditions

p97

79
Q

_____ ______ are truss structures that are developed in three dimension.

A

Space frames

p97

80
Q

The _________ in truss assemblies are a critical part of the truss.

A

connectors

p98

81
Q

Wall that supports itself and the weight of the roof and/or other internal structural framing components such as the floor beams above it.

A

Bearing wall

p98

82
Q

In a ______ structure, structural support is provided in a manner similar to the way the skeleton supports the human body.

A

frame

p99

83
Q

When the joist between a column and a beam are reinforced so bending stresses can be transmitted through the joints, the structural system is known as a ?

A

rigid frame

p100

84
Q

_____ and ______ frames are most frequently encountered in concrete structures.

A

Slab and column

p101

85
Q

System of construction in which the building consists primarily of an enclosing surface and in which the stresses resulting from the applied loads occur with in the surface bearing wall structures is called ?

A

Surface System

p101

86
Q

Structure with an enclosing surface of a thin stretched flexible material. Examples of these are a simple tent or an air-supported structure.

A

Membrane Structure

p101

87
Q

Rigid, three-dimensional structure having an outer “skin” thickness that is small compared to other dimensions is called ?

A

Shell Structure

p102

88
Q

Determining the type and magnitude of the ________ to which the structure will be subjected is the most critical aspect of engineering design.

A

forces

p 71

89
Q

The air that makes up the atmosphere is a gas that, like all substances, has ________.

A

mass

p 73

90
Q

Wind

The “clean-off effect” noted above is of particular concern where a building has projections such as _________ and _________.

A

canopies and parapets

p 73

91
Q

Wind

In designing buildings to withstand the force of wind, the primary effect considered is the force due to __________ ___________.

A

direct pressure

p 73

92
Q

Wind

The force resulting from wind is particularly dangerous when it occurs against an _________ ________. Situations of this type can occur at ______________ sites.

A

unbraced wall / construction

p 74

93
Q
  • Forces developed by earthquakes. These are some of the most complex forces exerted on a building.
A

Seismic Forces

p 75

94
Q

Earthquakes

In some areas, the design professional needs to give little or no special consideration to seismic loads because the structural provisions for ________ or _______________ loads are adequate for likely seismic loads.

A

wind or gravitational

p 75

95
Q

Earthquakes

The vibrational motion produced by earthquakes can be _______-_____________.

A

three-dimensional

p 75

96
Q

The magnitude of the forces developed within a building during an earthquake depend on several factors, including the following:

  • Magnitude of the __________ __________
  • Type of _____________
  • Nature of the _______ under the building
  • ___________ of the structure
  • Presence of __________ mechanisms within the building
A
  • vibratory motion
  • foundation
  • soil
  • stiffness
  • damping

p 76-77

97
Q

Although the movement of the ground beneath a building can be three-dimensional, the ____________ motion is the most significant force.

A

horizontal

p 77

98
Q

As the ground moves under a building, _________ tends to keep the upper portion of the building momentarily in its initial position.

A

inertia

p 77

99
Q

Earthquakes:

Increasing the ____________ of a building reduces its susceptibly to ground motions that have a relatively long (meaning slow) vibrational period.

A

stiffness

p 78

100
Q

Earthquakes

Buildings designed with ____________ structural frames are less likely to collapse if one member fails.

A

redundant

p 79

101
Q

Earthquakes

Damping mechanisms operate on a principle similar to the manner in which a _______ closer controls the speed of a _______.

A

door / door

p 79

102
Q

Elastomeric bearings

The bearings are made of either ________ _________ or _________.

A

natural rubber or neoprene

p 79

103
Q

Soil pressure

In determining the force created by active soil pressure, the soil is assumed to behave like a ________.

A

fluid

p 80

104
Q

In addition to the forces already discussed, other forces arising from ______________ ________, ___________ and __________ also may be exerted on a building.

A

temperature change, vibration, and shrinkage

p 81

105
Q
  • Weight of the structure, structural members, building components and any other feature permanently attached to the building that is constant and immobile. Load on a structure due to its own weight and other fixed weights.
A

Dead load

p 81

106
Q

Earthquakes:

Increasing the ____________ of a building reduces its susceptibly to ground motions that have a relatively long (meaning slow) vibrational period.

A

stiffness

p 78

107
Q

Earthquakes

Buildings designed with ____________ structural frames are less likely to collapse if one member fails.

A

redundant

p 79

108
Q

Earthquakes

Damping mechanisms operate on a principle similar to the manner in which a _______ closer controls the speed of a _______.

A

door / door

p 79

109
Q

Elastomeric bearings

The bearings are made of either ________ _________ or _________.

A

natural rubber or neoprene

p 79

110
Q

Soil pressure

In determining the force created by active soil pressure, the soil is assumed to behave like a ________.

A

fluid

p 80

111
Q

In addition to the forces already discussed, other forces arising from ______________ ________, ___________ and __________ also may be exerted on a building.

A

temperature change, vibration, and shrinkage

p 81

112
Q
  • Weight of the structure, structural members, building components and any other feature permanently attached to the building that is constant and immobile. Load on a structure due to its own weight and other fixed weights.
A

Dead load

p 81

113
Q

___________ distributed loads must have structural support to counter the different stresses.

A

Unevenly

p 83

114
Q

An industrial paper cutter is an example of a _____________ load.

A

concentrated

p 83

115
Q

A building collapses or partially collapses - when the _________ loads exceed the ability of the structural system to support them. The collapse represents a loss of ____________.

A

applied / equilibrium

p 85

116
Q

The loads and forces applied to a structural member creates __________ _________ within the member.

A

internal forces

p 86

117
Q

Internal forces - stress

This bending force is known as a ___________ ___________ and is equal to the force multiplied by the distance at which the bending moment is applied.

A

bending moment

p 87

118
Q
  • Those vertical or horizontal forces that tend to pull things apart; for example the force exerted on the bottom chord of a truss.
A

Tension

p 87

119
Q

In the design of structures, the _________ within structural members must be kept below the _________ at which the material being used would fail.

A

stresses / stresses

p 88

120
Q

Stresses

It is typical for stresses to occur in ______________ within an individual member.
In the beam shown in figure 3.27, the applied load creates ________ stress in the bottom of the beam and ___________ stresses in the top of the beam.

A

combination / tension / compressive

p 88

121
Q

Stress

Exterior loads can also be classified as _______, __________, or ___________ according to the manner in which they are applied.

A

axial, eccentric, or torsional

p 88

122
Q

Stress

Axial loads are applied along the members ______.

A

axis

p 89

123
Q

Stress

Eccentric loads are applied to one side of the cross section, creating a ___________ tendency.

A

bending

p 89

124
Q

Stress

Torsional loads are applied at an angle to the cross section, creating a ___________ tendency.

A

twisting

p 89

125
Q

A _______ is a structural member that can carry loads perpendicular to its longitudinal dimension.

A

beam

p 90

126
Q

A ________ ___________ beam is supported at each end and is free to rotate at the ends.

A

simply supported

p 90

127
Q

A _____________ beam is supported at one end.

A

cantilever

p 90

128
Q

______________ beams are rigidly supported at each end.

A

Restrained

p 90

129
Q

If a beam supports loads, the top of the beam is subjected to _______________ stresses and the bottom of the beam is subjected to __________.

A

compressive / tension

p 91

130
Q

The maximum compression and tension stresses in a beam occur in the ______ and ________ of the beam.

A

top and bottom

p 92

131
Q

In an I-beam, the top and bottom portions of the beam are known as the top and bottom ________.

A

flanges

p 92

132
Q

___________ are structural members designed to support an axial compressive load.

A

Columns

p 93

133
Q

Arches are designed to carry loads across a __________ and have application as support for roofs and entrances in masonry buildings.

A

distance

p 93

134
Q
  • Structural member used to form a roof or floor framework. These form triangles or combinations of triangles to provide maximum load bearing capacity with a minimum amount of material; often rendered dangerous by exposure to intense heat, which weakens gusset plate attachment.
A

Truss

p 95

135
Q

The top members of a truss are called the _____ _______ and the bottom members are called the ________ ________. The diagonal members are called either ___________ or _____ __________.

A

top chords / bottom chords / diagonal or web members

p 96

136
Q

Lightweight _______ trusses, known as ______ _________, are also used for floor and roof construction in fire-resistive and non combustible construction.

A

steel / bar joists

p 97

137
Q

Failure of a ____________ will result in failure of the truss.

A

connector

p 98

138
Q

A common method of construction use the ________ of a building to support spanning elements such as beams, trusses, and precast concrete slabs. These are appropriately known as ________ _______ structures.

A

walls / bearing wall

p 98

139
Q

In a bearing wall structure, the walls are subjected to __________ loads.

A

compressive

p 98

140
Q

________ _______ wall construction uses relatively closely spaced vertical steel studs connected by top and bottom horizontal members.

A

Steel stud

p 99

141
Q

_______ and _______ construction uses a series of vertical elements to support horizontal elements.

A

Post and beam

p 99

142
Q

Post and beam:

The vertical posts may be spaced up to _____ inches apart, unlike stud wall construction where the studs are ____ to ____ inches apart.

A

24 / 12 to 16

p 100

143
Q

A power station cooling tower is an example of a _______ _________.

A

shell structure

p 102

144
Q

What is defined as any effect (or force) that a structure must resist?

A

Load

p72

2022 - Building Construction Related to the Fire Service - JDS (14 decks)

Brainscape helps you reach your goals faster, through stronger study habits.
© 2024 Bold Learning Solutions. Terms and Conditions