CHAIN DRIVES Flashcards

1
Q

Define the three (3) basic

components of a chain drive

A

Chain
Driver Sprocket
Driven Sprocket

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

Describe how to calculate sprocket ratio

A

Number of teeth on Driven over Number of teeth on Driver.

NDVN ÷ NDVR

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

List four (4) types of Chain drives

A

Roller Chain
Rollerless Chain
Silent Chain
Leaf Chain

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

Describe (4) types of Roller Chain Drives

A

Single-Strand Chain
Multiple- Strand Chain
Double-Pitch
Offset Chain

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

Describe the operation of a single-strand roller chain drive

A

Single-strand chains are used for most common general purpose applications for low to medium power transmissions

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

Rollerless chains are similar in construction to a Roller chain except they have no _______

A

Rollers

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

______ Chain create less noise than standard chains because of their inverted tooth design

A

Silent

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

Chains that are made up of a series of plates held together by pins are called _______,with no rollers.

A

Leaf Chains

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

_____ Strands chain similar to standard chains, but they have two or more chain widths.

A

Multiple Strands

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

The interlock between chain and sprocket prevent the chain from ______ when a load is applied to the socket .

A

Slipping

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

Describe how to measure Chain Sag

A

Chain sag is measured by ,rotating the sprockets so there is little to no chain sag in the slack side. Using Straight Edge and Rule. Measure halfway between sprockets

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

Describe two methods used to adjust chain sag

A

Adjustable Centers

and Idlers

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

The allowable mid-span movement of a horizontal oriented chain drive is (4) to ___ Percent

A

6%

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

The allowable mid-span movement of vertical oriented chain drive is ____ to (3) Percent

A

2

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

In Chain Drives Dividing the mid-span movement by (2) will give you the _______?

A

Chain Sag

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

A chain should be replaced when its length becomes _____ percent longer than its original length

A

3

17
Q

Roller chain is made up of two types of links Roller links and _____ Links

A

Pin

18
Q

Another name for silent chain is ________ tooth chain.

A

Inverted

19
Q

A silent chain drive system usually produces ____% less noise than a standard roller chain drive.

A

35

20
Q

Multiple-strand chain has two or more _______ of chain connected together called strands.

A

Widths

21
Q

The silent chain, guides are aligned with the ________ in the sprocket.

A

Grooves

22
Q

The first two or three digits of the chain sizing code reveal the ________ of the chain.

A

Pitch