CAD

Question 1

Extrude

Answer 1

Select datum
Sketch shape using correct drawing tools
Define correct dimensions- lift from drawing if shown
Extrude to length

+add extrude to length
-subtract extrude to length

Question 2

Revolve

Answer 2

Select datum
Create axis in the middle of the component
Sketch half required shape with correct drawing tools on one side of the center line
Define correct dimensions
Revolve to correct degrees

Question 3

Rectangular Array

Answer 3

Select component 
Select box array type
Define no. of columns and rows
Define center spacing
Complete box array

Question 4

Circular Array

Answer 4

Select component
Select radial array type
Define axis
Complete radial array

Question 5

Loft/ Blend

Answer 5

Select datum
Select loft feature
Sketch shape with correct drawing tools and define correct dimensions
Define loft height
Sketch shape with correct drawing tools to correct dimensions
Complete loft (or add more stages if required)

Question 6

Sweep

Answer 6

Select datum
Sketch path using correct drawing tools to correct dimensions
Sketch required shape at start of path to correct dimensions
Complete sweep

Question 7

Offset

Answer 7

Mates/ aligns two faces or workplaces by making their planes parallel and constraining the separation distance between the planes

Question 8

Helical sweep

Answer 8

Select datum 
Create centre axis in correct position 
Define the path- draw a line the correct distance from the centre (start and end of the line defines the start and end of the helix)
Complete helical sweep
Define the pitch (angle)

Question 9

Shell

Answer 9

Select correct face

Define thickness

Question 10

Fillet

Answer 10

Select corners
Define radius (regular- equal radius, irregular- unequal radius)

Question 11

Chamfer

Answer 11

Select corner
Define offset (regular- equal offset from corner, irregular- unequal offset from corner)

Question 12

Mirror

Answer 12

Select sketch or component

Select edge or axis as a centre line to complete the mirror