Cabin Atmosphere Control Systems

Question 1

Is there any special requirement as to the type of oxygen used in an aircraft and if so, what is it?

Answer 1

Only aviator’s breathing oxygen should be used.

Question 2

Describe the operating principle of a continuous flow oxygen system.

Answer 2

High pressure oxygen flows from the storage cylinder to a pressure regulator where its pressure is reduced and then to the mask outlets whenever the system is turned on.

Question 3

Describe the operating principle of a pressure-demand oxygen system.

Answer 3

They provide oxygen to the mask at higher than atmospheric pressure when used at extremely high altitude, forcing oxygen into the users lungs.

Question 4

What should be used to purge an oxygen system of moisture?

Answer 4

Oxygen.
Dry air.
Or dry nitrogen.

Question 5

What action must be taken when an oxygen system has been open to the atmosphere?

Answer 5

The system must be purged of any moisture.

Question 6

Describe the safety precautions that should be observed when servicing oxygen systems:

Answer 6

Avoid all contact with petroleum based oil or grease.
Don’t smoke.
Keep everything very clean.
Service systems outdoors, if possible.
Keep caps on bottles to protect valves.

Question 7

What is a roots blower?

Answer 7

A type of engine driven compressor. 

Question 8

Name two different types of independent cabin air compressors:

Answer 8

Positive-displacement.
Centrifugal.

Question 9

What is the source of pressurization air in most jet aircraft?

Answer 9

Engine bleed air.

Question 10

What device provides the principle means of controlling cabin pressure?

Answer 10

The outflow valve.

Question 11

What unit regulates the position of an outflow valve?

Answer 11

Cabin pressure controller.

Question 12

Name several methods used on reciprocating-engine aircraft for providing heated cabin air.

Answer 12

Exhaust shroud heat exchangers.
Combustion heaters.
Electric heaters.

Question 13

What is the function of the ventilating air in a combustion heater?

Answer 13

Transports the heat from the heater into the cabin.
Prevents combustion gases from entering the cabin if the combustion chamber develops a crack.

Question 14

What are the sources of ventilating air in a combustion heater?

Answer 14

Ram air (in flight).
Blower (on the ground).
Compressor (if the airplane is pressurized).

Question 15

Name the basic components of an air cycle cooling system:

Answer 15

Compressor.
Expansion turbine.
Heat exchangers.
Various valves.

Question 16

Describe the basic operating principles that allow an air cycle system to produce cool air.

Answer 16

Hot engine bleed air is cooled in the primary heat exchanger, compressed, then cooled again in the secondary heat exchanger. This air is expanded across the turbine where energy is extracted, and the pressure is reduced. This produces a large temperature drop.

Question 17

Describe the basic operating principles of a water separator.

Answer 17

Cool, moist air is swirled so that the water droplets are separated by centrifugal force, captured by a sock, and drained.

Question 18

Name the principal components of a vapor cycle system.

Answer 18

Compressor.
Condenser.
Expansion valve.
Evaporator.

Question 19

In what significant way is a vapor cycle cooling system different from an air cycle system?

Answer 19

Vapor cycle systems use a refrigerant liquid.

Question 20

Why is oil added to the refrigerant in a vapor cycle air conditioning system?

Answer 20

To lubricate the compressor.