Boson Lb 4.5

Question 1

restores the default behavior of automatic route summarization

Answer 1

[no] auto-summary

Question 2

assigns an Ethernet interface to an EtherChannel group

Answer 2

channel-group [port-channel-number] mode {auto [non-silent] | desirable [non-silent] on | active | passive}

Question 3

configures the EtherChannel negotiation protocol for the interface

Answer 3

channel-protocol {lacp | pagp}

Question 4

configures a list of networks for the specified routing protocol on the specified network

Answer 4

network {network-address}

Question 5

converts a Layer 2 switch port into a routed port

Answer 5

no switchport

Question 6

configures the load balancing method used by port-channel interfaces on the device

Answer 6

port-channel load-balance {dst-ip | dst-mac | src-dst-ip | src-dst-mac | src-ip | src-mac}

Question 7

enters router configuration mode for EIGRP

Answer 7

router eigrp {autonomous-system-number}

Question 8

displays EtherChannel information for a channel

Answer 8

show etherchannel [channel-group-number] {detail | load-balance | port | port-channel | summary | protocol}]

Question 9

displays the interface’s Data Link layer status; when the type and number parameters are included, displays detailed information about the specified interface

Answer 9

show interfaces [type number]

Question 10

displays the line status of all interfaces

Answer 10

show interfaces status

Question 11

displays spanning tree state information

Answer 11

show spanning-tree

Question 12

displays the IP routing table

Answer 12

show ip route