Book 3: 4-13 - "Intro to Heating Plant Safety" Flashcards
During the rehabilitation of an injured worker, the supervisor should:
Select one:
A. Have as little contact as possible with the worker.
B. Not ask the worker for assistance in determining prevention methods.
C. Let the worker know the investigators are finding fault.
D. Assist the worker in seeking and obtaining support services.
E. Not inform the worker of investigation progress.
D. Assist the worker in seeking and obtaining support services.
An employer must not allow shortcuts when it comes to:
Select one:
A. Annual shutdowns
B. Safety Committee formation
C. Isolation of equipment
D. Equipment overhaul scheduling
E. Production
C. Isolation of equipment
When isolating a steam turbine-driven centrifugal pump, you should first:
Select one:
A. Open the breaker
B. Close the turbine exhaust steam valve
C. Close the pump inlet valve
D. Close the high-pressure steam inlet valve
E. Open the turbine casing drain
D. Close the high-pressure steam inlet valve
Typically, a self-contained breathing apparatus typically has a maximum capacity of _________ minutes, though some may have more.
Select one:
A. 15
B. 120
C. 5
D. 30
E. 10
D. 30 minutes
It is the employer’s responsibility to ___________ personal protective equipment.
Select one:
A. Supply, ensure usage, and maintain
B. Wear, care for, and maintain
C. Supply and ensure usage of
D. Only supply
E. Supply, and encourage the use of
C. Supply and ensure usage of
The pressure in a fully charged self-contained breathing apparatus is _________ kPa.
Select one:
A. 31.03
B. 101.3
C. 31 030
D. 10 130
E. 18 500
C. 31 030
If a person is not sure if a piece of equipment is safe to work on, he/she should:
Select one:
A. Ask a qualified worker to indicate and explain the points of isolation.
B. Check the isolator’s workplace reputation.
C. Check with a co-worker before proceeding.
D. Fully trust the permit information.
E. Ask the foreman if it’s safe.
A. Ask a qualified worker to indicate and explain the points of isolation.
Which one of these statements is true?:
Select one:
A. The attitude of an injured worker has no impact on the outcome of his injury.
B. Financial costs of a workplace injury outweigh all other costs
C. A workplace injury can destroy an employee’s self esteem
D. An injured worker would never be expected to learn new skills
E. An injured worker usually causes his own injury.
C. A workplace injury can destroy an employee’s self esteem
A worker may be protected against harmful chemical fumes by wearing ______________.
Select one:
A. Safety goggles
B. Nose plugs
C. A face shield
D. A gas mask
E. A filter type respirator
D. A gas mask
Why should hard hats never be painted?
Select one:
A. Toxic fumes may be released.
B. Paint will weaken the plastic.
C. Paint does not adhere well to plastic
D. Different colors normally indicate varying job positions in the plant.
E. Hats are already painted by the manufacturer.
B. Paint will weaken the plastic.
Individual responsibilities for health and safety must be borne by:
Select one:
A. Management only
B. Employees only
C. All personnel in a work place
D. Owners only
E. Owners and government
C. All personnel in a work place
The most important way an employer can reduce the negative effects of workplace injuries is to:
Select one:
A. Inform supervisors of the importance of maintaining close contact with any worker who may become injured
B. Ensure supervisors know how to contact emergency assistance
C. Have an effective health and safety program in place
D. Establish an appropriate number of trained first aid personnel
E. Employ an on-site nurse
C. Have an effective health and safety program in place
A worker may be protected against harmful chemical fumes by wearing ______________.
Select one:
A. Safety goggles
B. Nose plugs
C. A face shield
D. A gas mask
E. A filter type respirator
D. A gas mask
The pressure in a fully charged self-contained breathing apparatus is _________ kPa.
Select one:
A. 31.03
B. 101.3
C. 31 030
D. 10 130
E. 18 500
C. 31 030
An employer must not allow shortcuts when it comes to:
Select one:
A. Annual shutdowns
B. Safety Committee formation
C. Isolation of equipment
D. Equipment overhaul scheduling
E. Production
C. Isolation of equipment
