Block 3 Forms and Pubs Flashcards
FAA form 337 is used to record and document:
-Special inspections
-Major and minor repairs, and major alterations
-Major repairs and major alterations
Major repairs and major alterations
Which of the following actions are required to be entered into the aircraft records?
-Compliance with SBs, ADs, and inspections
-Major repairs and major alterations to the airframe, engine, or prop
-Minor repairs and minor alterations to the airframe, engine, or prop
-Preventative maintenance by the pilot/operator
Compliance with SBs, ADs, and inspections; Major repairs and major alterations to the airframe, engine, or prop; Minor repairs and minor alterations to the airframe, engine, or prop; Preventative maintenance by the pilot/operator
Which of the FARs list the minimum areas that need to be checked during any inspection program.
-14 CFR Part 65
-14 CFR Part 91
-14 CFR Part 43 Appendix D
14 CFR Part 43 Appendix D
What constitutes the approval for return to service only for the work performed
-Signature
-Mechanic Cert number
-Pilot Cert number
Signature
An aircraft can be flown to another base after an inspection program found discrepancies that need to be completed
-True
-False
True
A 100-hr record entry must be recorded in each of the logbooks (airframe, engine, propeller), if kept separately.
-True
-False
True
An annual inspection is only required to be entered into the airframe records.
-True
-False
True
Inspection records need to contain which of the following information according to 14 CFR Part 43.11.
-Date and type of inspection
-Brief description of the extent of the inspection
-Signature, kind of certificate and number of certificate
-Total times of the aircraft, engine, and propeller
Date and type of inspection; brief description of the extent of the inspection; signature, kind of certificate and number of certificate; total times of the aircraft, engine, and propeller
An A&P rated mechanic can:
-Initiate an FAA form 337
-Sign FAA form 337 stating that the information on form is true and correct
-Sign the FAA form 337 approving the aircraft for return to service
Initiate an FAA form 337 and sign FAA form 337 stating that the information on form is true and correct
Who is responsible for making an entry in the aircraft records stating that an inspection program has been performed?
-The person performing the inspection program
-The owner/operator
-The pilot or any other FAA representative
The person performing the inspection program
A discrepancy list is provided to the owner after inspection if discrepancies are not cleared, this list indicates?
-That the aircraft is unairworthy
-The aircraft is airworthy except for those items on the list
-The aircraft is airworthy and can be flown
The aircraft is airworthy except for those items on the list
FAA Form 337 is not authorized for use with other than U.S. registered aircraft.
-True
-False
True
FAA Form 337, Block 8 uses FAA approved data only, and that data must have been approved prior to its use for that purpose
-True
-False
True
In which of the following publications can the datum of an aircraft be found?
-In the Illustrated Parts catalog
-In the overhaul manual for that aircraft
-In the TCDS for that aircraft
In the TCDS for that aircraft
Which part of the FAR’s governs the issuance of an Airworthiness Certificate?
-23
-21
-39
-65
21
If a mechanic wanted to find the technical description of an engine or propeller; they would look in?
-The respective TCDS for that product
-The pilot’s handbook
-The FAR’s covering that product
The respective TCDS for that product
A mechanic or the aircraft owner is responsible for checking the status of an AD whenever any maintenance is performed
-True
-False
False
AD compliance records are required to be retained and then transferred when the aircraft is sold.
-True
-False
True
Which of the following is not approved data?
-AC 43.13-1B
-AC 43.13-2B
-STCs
-ADs
AC 43.13-1B and AC 43.13-2B
Which CFR provides information regarding the proper instrument range markings for certification in the normal category
-Part 21
-Part 23
-Part 25
-Part 91
Part 23
Which part of an AD tells the mechanic what and when something needs to be done?
-The amendment number
-The applicability statement
-The compliance section
The compliance section
Who is responsible for determining that the aircraft continues to meet the requirements for its certification?
-The owner/operator
-Any mechanic holding an Inspection Authorization
-The primary mechanic for that aircraft
The owner/operator
Required placards for a particular aircraft can be found in:
-AC. 43.13-1B
-14 CFR Part 39
-The aircraft TCDS
-The amendment number
The aircraft TCDS
If a condition causes a particular aircraft to fail to meet its airworthiness certification, the FAA can issue
-AD
-TCDS
-SB
-SNAFU
AD
Any product, part, or material installed on a type certificate product must meet FAA airworthiness standards.
-True
-False
True
Any attached sheet to a form 337 does not need the aircraft registration mark since the main form already has it
-True
-False
False
What is the correct disposition of FAA form 337?
-Generate two copies: one for the owner/operator and one for the FAA
-Generate two copies: one for the FAA and one for the repair agency
-3 copies: 1 for the FAA, 1 for the repair agency & 1 for the owner
Generate two copies: one for the owner/operator and one for the FAA
When records are lost or destroyed, they will need to be reconstructed. What data is needed to reconstruct the records
-Total time-in-service of the airframe
-Dates and times of the last inspection program performed
-You cannot reconstruct records without the FAA’s permission
Total time-in-service of the airframe
A Technical Standard Order is issued by:
-The Administrator under 14 CFR Part 23
-The Administrator under 14 CFR Part 21
-The Administrator under 14 CFR Part 65
-The Administrator under 14 CFR Part 39
The Administrator under 14 CFR Part 21
The Acft Listing, list acft models manufactured under a type certificate with less than how many?
-10
-20
-30
-50
50
Any fraudulent entry in a logbook, report, or record is subject to the suspension or revocation of:
-Any airman or ground instructor certificate or rating held by that person
-All certificates used in/for the fraudulent entry
-Only the airframe rating if used in recording an airframe repair
Any airman or ground instructor certificate or rating held by that person
A special flight permit may be issued for an aircraft that is flying passengers on a scheduled operation.
-True
-False
False
Which of the following publications list the standards for bolts protruding through self-locking nuts?
-AC 43.13-1B
-AC 43.13-2B
-14 CFR Part 43.13
-14 CFR Part 43.13
AC 43.13-1B
