Bath Accessories

Question 1

What’s the tolerance for scratched, damaged, or defective bath accessories?

Answer 1

Zero

Question 2

What’s the tolerance for plumb and level on bath accessories?

Answer 2

Zero

Question 3

What height are toilet paper holders installed?

Answer 3

24”

Question 4

How far are toilet paper holders installed from a back wall?

Answer 4

34”

Question 5

What height are towel bars installed?

Answer 5

54”

Question 6

What height are towel rings and robe hooks?

Answer 6

64”

Question 7

Screws in toilet paper holders are not to pierce __________________.

Answer 7

Through the inside of the cabinet

Question 8

All joints in shower enclosures are to be cut ____________, and _________ with no sharp or jagged edges.

Answer 8

Straight

Tight

Question 9

Top rails on shower enclosures to be cut tight to walls with gaps not to exceed __________ of an inch.

Answer 9

1/16”

Question 10

Doors on enclosures to operate and latch correctly, with no ____________, ____________, or ___________.

Answer 10

Binding
Rubbing
Noise

Question 11

Sliding doors to be adjusted so that the doors close flush to the wall _____________________.

Answer 11

On both sides

Question 12

All shower glass to be _______________________ tempered glass.

Answer 12

UL approved

Question 13

No ________ or ___________ to the glass.

Answer 13

Chips

Damage

Question 14

Scratches on enclosure glass visible from ________ feet.

Answer 14

6

Question 15

Medicine cabinet to be fastened with a minimum of __________ screws.

Answer 15

4

Question 16

Shelving in medicine cabinets installed ___________ ___________ .

Answer 16

Evenly spaced

Question 17

Medicine cabinet doors not to ________________ with no rubbing, binding or noise.

Answer 17

Open/close (ghost)

Question 18

Mirror glass to be a minimum of __________ of an inch thick.

Answer 18

3/16”

Question 19

All edges of mirrors to be _____________.

Answer 19

Ground

Question 20

What’s the tolerance on cracked, chipped or defective mirrors?

Answer 20

Zero

Question 21

No scratches in mirror glass visible from _________ feet.

Answer 21

3’

Question 22

Mirrors to be installed centered on the vanity backsplash with ________ __________ on both ends.

Answer 22

Equal reveals

Question 23

Minimum _______ clips evenly spaced to secure the top edge of the mirror.

Answer 23

2

Question 24

The back of the mirror is to be no more than _________ of an inch away from the wall.

Answer 24

1/4”

Question 25

Mirrored closet doors installed plumb with the jamb on one side within ________ of an inch _________ feet.

Answer 25

1/8 “

6’

Question 26

No scratched glass visible from ________ feet on mirrored closet doors.

Answer 26

3’