Auto shop 2 Flashcards
If a car uses too much oil, which of the following parts may be worn?
A. Camshaft
B. Connecting rods
C. Fuel pump
D. Piston rings
D
Clean air filters are important because
A. Dirty filters can cause a decrease in fuel mileage.
B. They remove pollutant, which can decrease in performance.
C. They keep the oil from becoming contaminated
D. Both A and b
D
The alternator
Supplies regulated power to the battery
In which Automotive system, would you find a “ Wishbone”
Suspension
If the electrolyte solution in the battery is too low, you should add
Distilled water
What area of your car should be flushed periodically to maintain optimum performance
Cooling system
The primary purpose of a carburetor is too?
Mix fuel in air
Car restores often seek NOS parts what does NOS stand for?
New old stock
To make spark plugs, work efficiently, the coil and breaker
Create a very high electrical voltage
Schrader valves Can be found in your cars?
Tires
A bent frame causes
Improper tracking
In the tire designation 205/55 R 15 92 H, What does the H signify?
Maximum sustained speed
When the tightness of screws and or bolts is important, it’s best to use?
A torque wrench
Hammer faces are commonly made of each of the following materials except?
A. Steel
B. Brass
C. Glass
D. Lead
C
Hammers, Mallets, and sledges are all striking tools, but mullets and sleds don’t have?
Claws
Round objects can be measured most exactly using a
Set of calipers
The Best chisel to use when making a circular cut in metal is a?
Round chisel
A stillson wrench is a type of?
Pipe wrench
Painting on a surface with too much moisture can?
Causes bubbling
A tool used to control the location and or motion of another tool is called a?
Jig
An eight point saw?
Has seven teeth per inch
Concrete is made by mixing?
Mineral aggregate, a binder, and water
