AREA 3 Flashcards
1
Q
max stack height in layers
A
wheat, barley, corn - 18
paddy - 16
rice - 16
2
Q
max stack height, meters
A
wheat, barley, corn - 4.57 m
paddy - 6 m
rice - 5.5 m
3
Q
the recommended dimension for maximum piling of stacks to conform with the fumigating sheets in situations where warehouse cannot be made airtight
A
7.3m x 21.9m x 4.5 m
4
Q
standard pallet size
A
152 cm x 61 cm
5
Q
recommended warehouse dimension
10,000 cavans
A
10m x 30m
6
Q
recommended warehouse dimension
50,000 cavans
A
20m x 48m
7
Q
recommended warehouse dimension
100,000 cavans
A
25m x 78m
8
Q
recommended warehouse dimension
500,000 cavans
A
75m x 142m
9
Q
minimum height from the floor to the beam for normal temperature warehouse
A
6m
10
Q
minimum requirement for illumination sa warehouses
A
3W/m2
11
Q
height sa floor from the ground for easier loading or unloading of trucks padung sa side sa warehouse
A
1m
12
Q
color sa pintal for warehouses
A
white, inside and out
13
Q
chb thickness na gamiton for warehouses
A
150 mm thick
14
Q
rebar diameter na gamiton sa warehouse
A
12 mm diameter
15
Q
standard roof truss span for warehouse
A
14.5 m
16
Q
standard entrance size for normal temperature warehouse
A
6 m wide x 4 m high
17
Q
anti bird grills mesh for warehouses
A
20 mm mesh
18
Q
paes 419:2000
A
warehouse for bagged storage of grains
19
Q
paes 401:2000
A
housing for swine production
20
Q
space requirements per animal (m2/animal)
groups of growing swine
A
0-10kg, 0.11
11-20 kg, 0.2
21-40 kg, 0.35
41-60 kg, 0.5
61-80 kg, 0.7
81-100 kg, 0.85
21
Q
space requirements per animal (m2/animal)
gilts up to mating
A
1
22
Q
space requirements per animal (m2/animal)
adult pigs in groups
A
2.5
23
Q
space requirements per animal (m2/animal)
gestating sows
A
1.2
24
Q
space requirements per animal (m2/animal)
boar pens
A
7.5
25
space requirements per animal (m2/animal)
lactating sows and litters
individual pens, 7.4
multi sucking groups, 5.6
26
space requirements per animal (m2/animal)
dry sows
1.8
27
height of pen partition
under 25 kg
0.7 m
28
height of pen partition
25-100kg
0.9 m
29
height of pen partition
sow
1 m
30
height of pen partition
boar
1.2 m
31
swine housing feeding trough shall be at least BLANK and depth shall be BLANK
300mm
250mm
32
automatic watering cups or bowls
20 weaner, 12 gilts, 10 sows
per cup
33
lighting intensity (lumen,m2)
breeding, gestation and farrowing - 150
nurseries - 100
growing and finishing - 50
inspection areas - 200
34
1.8mm - 2mm
grit no. 10
35
1.5mm - 1.7mm
grit no. 12
36
1.2mm - 1.4mm
grit no. 14
37
1.1mm - 1.19mm
grit no. 16
38
0.86mm - 1.09mm
grit no. 18
39
100kW- 25 MW hydro power plant
small
40
above 100 MW hydro plant
large
41
25-100 MW hydro plant
medium
42
5-100 kW hydro plant
micro
43
less than 5 kW hydroplant
pico
44
PAES 402:2001
housing for broiler production
45
materials that are placed around the brooder stoves to prevent the chicks from straying too far away from the heat supply until they learn the source of heat
brooder guard
46
long and narrow type of houses wherein at least one-half of the front and the back of the house are open
open-sided housing
47
floor space requirements for 4 weeks and below na mga birds
6.25 m2/100 birds
48
floor space requirements for 4 weeks above na mga birds
12.5 m2/100 birds
49
entrance dimensions for broiler production
0.9m x 2m
50
mesh wire netting for broiler production na door
25mm mesh
51
flooring ht from the ground for broiler production
0.9 m from the ground
52
litter material depth on top sa cemented floor
50-100 mm
tas dapat naay solid wall nga 600mm ang ht. para ma retain ang litter
53
width sa pen sa broiler production
shall be about 10m-12m
54
during the first 48 hrs, pila dapat ang illumination para sa chicks
35 W/m2, for 23 hrs
3.5W nga light bulb
55
after the first 48 hrs, pila nalang ang illumination para sa mga chix
10W/m2
1 W nga light bulb
56
temperature maintained for 1-7 day old nga chix
32-35 deg C
57
temperature maintained for 8-14 day old nga chix
29-32 deg C
58
temperature maintained for 14-21 day old nga chix
27-29 deg C
59
feeder length requirement para sa chix (linear)
4 weeks and below - 4m/100 birds
above 4 weeks old - 7.5m/100birds
60
feeder length requirement para sa chix (round)
4 weeks and below - 4m/100 birds
above 4 weeks old - 5m/100birds
given that ang diameter sa pan is 305mm
61
waterer length requirement para sa chix (linear)
4 weeks and below - 2.5m/100 birds
above 4 weeks old - 4m/100birds
62
waterer length requirement para sa chix (round)
4 weeks and below - 1m/100 birds
above 4 weeks old - 1m/100birds
63
PAES 404:2000
housing for goat and sheep
64
minimum floor space requirement for doe/ewe related to weight
small (50kg-70kg)
-pregnant = 1.3m2/animal
-lactating = 2 m2/animal
large (over 70kg)
-pregnant = 1.6m2/animal
-lactating = 2.3m2/animal
65
minimum step width shall be pila man for goat n sheep housing
800mm
66
vertical distance between steps for goat and sheep housing
300mm
67
minimum floor slopes for goat and sheep housing
2% for concrete
4% for earth
68
for adequate ventilation (goat sheep housing), roof slope shall not be less than pila ka percent
25%
69
if roofing is made of indigenous materials (goat sheep housing), minimum roof slope shall be pila man
58%
70
brooder box dimension for newly born kids/lambs
500mm x 450mm x 350mm
71
suggested cross sectional shape for feeding troughs for goat and sheep housing
trapezoidal or semi cylindrical
72
minimum linear feeding space for goat or sheep housing
females
35kg - 350 mm/animal
50kg - 400 mm/animal
70kg - 450 mm/animal
73
minimum linear feeding space for goat or sheep housing
kid/lamb
250 mm/animal
74
minimum linear feeding space for goat or sheep housing
buck/ram
500 mm/animal
75
minimum dimension for kidding or lambing pen
1m x 1.5m
76
fence height for goat and sheep housing
at least 1.5m
77
farmstead type
all structures are in close proximity
concentrated
78
farmstead type
two or more separated groups
plantation/ranch
79
farmstead type
a residence and small service buildings that essential farm operations are carried on by hired services
suburban
80
farmstead type
most common type of farmstead where buildings are sufficiently far apart...
distributed
81
PAES 420:2002
farm workshop and machinery shed
82
PAES 420:2002
farm workshop should be at least situated how many meters from other buildings, to reduce fire hazard?
45m
83
minimum dimension for machinery shed doorway
3m high and 3.7m wide
-for bigger equipment, a clearance of 0.6m wide sa sides
84
welding area for machinery shed flow rate
28.3-57 m3/min
85
PAES 206:2015
Agricultural machinery - rice mill- specs
86
type of rice mill having an under runner stone disc huller and vertical cone whitener
cone "cono" type
87
type of rice mill using rubber roll huller and utilizes friction and/or combination of other types of whitener
rubber roll type
88
type of a huller with rotating blades and utilizes pressure such as coriolis force
centrifugal type
89
rice grain from which the hull, the germ, the outer bran layers, and the greater part of the inner bran layer have been removed, but part of the lengthwise streaks of the bran layers may still be present on less than 20% of the sample grains
well-milled rice
90
type of whitening machine consisting of a cylinder or cone coated with abrasive material such as emery stone or any similar materials enclosed in a perforated steel housing
abrasive type
91
type of whitening machine consisting of a ridged cylinder enclosed in a perforated steel housing
friction type
92
milling recovery index sa mga rice mill, min
0.98 tanan except sa under runner or cone type na 0.97
93
hulling eff sa mga rice mill (minimum)
75
94
%head rice index sa mga rice mill
0.9
95
no. of paddy per kg milled rice sa mga rice mill
15, tanan
96
CPES Rating
weight for horizontal projects and vertical projects DURING CONSTRUCTION
60% for horizontal
70% for vertical
97
RA 9184
government procurement act
98
CPES Rating DURING CONSTRUCTION
Work manship
0.4
99
CPES Rating DURING CONSTRUCTION
Mat erials
0.3
100
CPES Rating DURING CONSTRUCTION
Time
0.15
101
CPES Rating DURING CONSTRUCTION
Facilities
0.03
102
CPES Rating DURING CONSTRUCTION
Environmental safety
0.07
103
measurement of light flux density
footcandle, lux
104
measurement of light energy
flux
105
6 basic functions of AWMS
production
collection
storage
transfer
treatment
utilization
106
PD 856
sanitation code of the philippines
107
The minimum main product recovery requirement based on the performance criteria for corn mill
64%
108
The minimum by-product recovery requirement based on the performance criteria for corn mills
31%
109
allowable noise in corn mills
100 db
110
It consists of metal blades that turn to cut degermed corn kernels into smaller sizes.
Rotary blade/Hammer mill-type
111
Corn kernels are ground using two rollers made of steel that rotate in different direction
Steel roller
112
Corn grits are sorted into different sizes by passing through sieves of different mesh sizes that move back and forth.
oscillating
113
Corn grits are sorted into different sizes by passing through rotating sieves of different mesh sizes
rotary
114
maximum losses, corn mill
5%
115
degermer efficiency, minimum
80%
116
grits with particle size from 1.69mm to 2.00mm which passed through US Sieve No. 10 but are retained in US Sieve No. 12
corn grits number 10
117
grits with particle size from 1.42mm to 1.68mm which passed through US Sieve No. 12 but are retained in US Sieve No. 14
corn grits number 12
118
grits with particle size from 1.20mm to 1.41mm which passed through US Sieve No. 14 but are retained in US Sieve No. 16
corn grits number 14
119
grits with particle size from 1.01mm to 1.19mm which passed through US Sieve No.16 but are retained in US Sieve No. 18
corn grits number 16
120
grits with particle size from 0.842mm to 1.00mm which passed through US Sieve No. 18 but are retained in US Sieve No. 20
corn grits number 18
121
grits of main product
10, 12, 14, 16, 18
122
machine that removes the pericarp, crushes the kernel, polishes the grits, and sorts the grits into different sizes
corn mill
123
used to remove the germ, tip cap, and pericarp from the corn kernel
degermer
124
latent heat of water
336 kj/kg
144 btu/lb
125
minimum shelling recovery sa corn sheller
97%
126
minimum shelling efficiency for corn sheller
99.5%
127
corn sheller losses maximum
blower 1%
separation 1%
unshelled 0.5%
scattering 0.5%
128
minimum purity corn sheller
98%ch
129
mechanical damage percent sa sheller maximum
3%
130
net cracked kernel sa sheller, maximum
5%
131
at least pila ka trials sa mills
2
132
for single pass rice mills, pila ka hrs dapat na enough ang supply sa test samples
1 hr and 30 mins
133
for multi pass rice mills, pila ka hrs dapat na enough ang supply sa test samples
5 hrs
134
single pass mill, pila ka hrs at least ang duration sa test trials
30 mins
135
multi pass mill, pila ka hrs at least ang duration sa test trials
2 hrs
136
sa sampling for mills, pila ka kilo dapat
1.5 kg samples, tas 3 kabuok
137
minimum thickness for concrete cover sa slaughterhouse
40 mm
138
It is a device which serves as the first link between the service
entrance entrance switch and the generator
transformer
139
common sizes for service entrance ampacity rating
60
100
150
200
140
When the resistance of a certain circuit is zero or almost zero, the
circuit is called
shorted
141
one 20A circuit for each pila ka floor area
46m2
142
one 15A circuit for each pila ka floor area
35m2
143
are those conductors which are 8mm2 in diameter
wires
144
awg number sa wires
awg 8
145
conductors that are larger than wires
cables
146
resistance of the human body when dry
abt 500,000 ohms
147
resistance of the human body when wet
abt 300 ohms
148
4600 watts, minimum electrical load for
farm shop
milkhouse
149
3450 watts, minimum electrical load for
mga barn duha kabuok
150
2300 watts, minimum electrical load for
milking room
pig farrowing
151
1150 watts, minimum electrical load for
poultry brooding
152
best location for indoor type distribution center
nearest sa largest wattage rating
153
best location for outdoor type distribution center
nearest sa electrical load center
154
best location for pole type distribution center
sa electrical load center sa farmstead
155
percentage of energy converted sa fluorescent lamp to light
20%
156
percentage of energy converted sa fluorescent lamp to heat
80%
157
The commonly used threshing units for throw-in type thresher.
Peg tooth
158
The recommended rpm of rice thresher cylinder
800-1200 rpm
159
GPEP stands for
Grain Production Enhancement Program
160
It is the meat from rabbit
Lapan
161
The amount of heat transferred per unit temperature per unit length
Thermal conductivity
162
The amount of heat transferred per unit temperature per unit area
heat transfer coefficient
163
It is a plot of the aiflow against the pressure drop per unit depth of
grains and seeds, which shows the resistance to airflow of such products. This plot is also called
shedd's curve
164
The recommended minimum width for doorways of slaughter houses
1.5m
165
The process of strengthening concrete through hydration is known as:
curing
166
In a 3-phase Y-configuration system
line current and the phase current are equal
167
The recommended distance of a septic tank from a well is
at least 15 m
168
Since it is required that lighting controls should be located to be able
to light the path ahead and turn off lights without retracing steps, if a big room has two doors then the appropriate switches to use are:
three-way switches
169
The freezing temperature for eggs
28 F
170
Cyclone efficiency increases for ___.
a. small particles
b. medium particles
c. large particles
d. None of the above
C
171
standard stack for block stacking
9.14 x 6m
172
central pathway for warehouse
2m or not less than 1 m wider than the width of the forklifts
173
standard roof truss for warehouse
14.5m
174
recommended eave height for warehouse
7m, tas 2.5 tung eaves line and apex
175
65. The recommended overall height by ASAE for an agricultural pallet bin.
72 or 133 cm
176
The typical width of farm-to-market road for a two-lane roadway
6m
177
When a system deviates infinitesimally from equilibrium at every instant of its state, it is undergoing:
quasi-steady process
178
These are materials where the electrons in the outer shells have low
resistance to movement
conductors
179
The daily water requirement of boar and of sow at normal ambient
temperature
10-30 liters per day-animal
180
A factor of this value in watts per square meter must be used for all
floor area excluding porches, garages, basements or unused or unfinished spaces not adaptable for future use
32W/m2
181
The total building floor area requirement for 1,000 fattening hogs is:
6000 – 10000 sqft
182
The biological decomposition of nitrogenous organic matter producing a foul-smelling product associated with the anaerobic degradation of proteins.
putrefication
183
The weight of a steel roof truss W in pounds per square foot of the
horizontal surface as a function of span L in feet can be determined by an empirical equation ___.
W = 0.4 + 0.040 L
184
The weight of a timber truss W in pounds per square foot of the
horizontal surface as a function of span L in feet can be determined by an empirical equation ___.
W = 0.5 + 0.075 L
185
The optimum relative humidity for storing fruits and vegetables is ___.
80-90%
186
The maximum allowable safe height of sack pile in bag storage
18-25 sacks
187
The maximum speed requirement for a vertical abrasive whitening cone machine.
13 m/s
188
The average capacity of the pair of rubber is
100-200 tons paddy pair
189
rpm for steel huller operations in smaller mill and larger mill
800-900 rpm
600-800 rpm
190
Recommended peripheral speed of a rubber roller for hulling operation
18 m/s
191
The process of mixing two or more different products together, such as grains and supplements, to obtain desired food ratios, or the process of mixing different quantities of the same product with different size of kernels to obtain the desired quality grade is called
blending
192
A non-degradable portion of the manure is sometimes called:
Fixed solids
193
What is a physical factor related to the evaporative potential of air and which causes a product to shrivel called?
infiltration rate
194
Current and voltage are “in-phase”, except when
the true power is greater than the apparent power
195
The ratio of the average load to the maximum demand of a system.
demand factor
196
The unit used when specifying the intensity of light needed for various seeing task.
footcandles
197
Cut nails, duplex nails, cement nails and all kinds of nails and staples
are all classified as _________.
permanent fasteners
198
The sacks for milled rice are usually labeled with these information,
except:
storage measures
199
If a poultry products is stored at a temperature of 35-40°F, the product quality can be maintained within
1-2 days
200
For dwelling units, Philippine Electrical Code 2010 states that the
convenience and lighting load can be estimated as
24 W/m2
201
It is the meat of sheep that is less than one year old.
lamb
202
meat of sheep
mutton
203
meat of goat
chevon
204
layer of aggregate, soil-treated aggregate, treated soil, or soil aggregate of designed thickness that rests upon the Subbase or if no Subbase, upon the sub-grade, to support a surface course.
base course
205
ratio between a test load and an arbitrarily defined standard load, expressed as a percentage
CBR
206
structural component of specified thickness; it may consist of one layer or more
course
207
determination of the degree of compaction of the soil
field density test
208
portion of a road intended for the movement of vehicles, exclusive of shoulders
road carriageway
209
lateral design width for one lane or two lanes strip of roadway
road carriageway width
210
space, location, or site intended to employ traffic consideration, preferably for the transport of agricultural and fisheries products
roadway
211
cross slope of the pavement at a horizontal curve, provided to partially counterbalance the centrifugal force on a vehicle going around that curve
superelevation
212
SAFDZ
Strategic Agricultural and Fisheries Development Zones
213
The maximum longitudinal slope shall be ___ for rolling and ___ for
mountainous terrain with maximum length of ____.
10%, 12%, 300m
214
A simple structure for shelter of livestock, storage of feed, or both,
and open to one or more sides. It may be separate or attached to another structure
shed
215
This happens when the electric field in a material is large enough, in
which conducting paths suddenly appear in the material. Electrons flow along one or more conducting paths, creating electrical sparks
electrical breakdown
216
The ASEAN Mutual Recognizition Arrangement of Engineering Services as stipulates in PRC Res. No. 3.5 2007 is an agreement among ASEAN countries except for
bangladesh
217
Unit for generator
kW
218
Upper portion of material which act as foundation subbase course
Subgrade (Gravel Road)
219
Lateral design width for one lane or two lanes strip of roadway
road carriageway width
220
In a building, which may be a source of latent heat?
moisture difference
221
Total pressure of a gaseous mixture is ____________ the sum of the partial pressure exerted by the individual gases or vapors.
equal to
222
Also called as milking parlor, it is a room where the cows are milked but not housed
milking room
223
minimum distance of milking parlor from lactating barn
30m
224
It is the point when additional heat transfer (or reduction) results in a
change of phase.
saturation
225
area requirement for 1000 swine
850m2
226
maximum temperature sa swinehouse
35degC basta newborn
pag dili newborn, 30 degC
227
area requirement for 1000 birds
125 m2
228
entrance door dimension for broiler housing
0.9 by 2 m
229
mesh for entrance door for broiler housing
25mm
230
elevation sa broiler housing from the ground
900 mm
231
post diameter sa broiler housing
200mm
232
type 1 construction
wood materials
233
type 2 construction
wood materials na fire resistant
234
type 3 construction
concrete and wood
235
type 4 construction
naa nay steel
236
type 5 construction
4-hr fire resistive
237
building height limit for J-1 type structures
15m
238
plain GI sheet dimensions
[90 cm x 2.4 m]
239
corrugated GI sheet dimensions
[80 cm x 1.5 m - 3.6 m]
240
The length of chain usually expressed in
pitches
241
The property which expresses the work potential of the energy contained in a system at a specified state is called
exergy
242
Consider turbulent flow through a smooth pipe. As the Reynolds number increases the friction factor
decreases
243
RPAS
remotely piloted aircraft system
244
laws of thermodynamics
0th - one system equal to 2nd system, 2nd system equal to 3rd system, one system is equal to 3rd system
1st - conservation of energy
2nd - entropy, energy degradation
3rd- the entropy of a perfect crystal is zero at the absolute zero temperature
245
Current rating for:
AWG 14
AWG 12
AWG 10
AWG 8
15
20
30
40
246
Energy harnessed from dead volcanoes
renewable energy
247
Refrigerant: 150.3 Btu/lb; somewhat toxic; flammable
methyl chloride
248
unit for magnetic flux
weber
249
unit for flux density
tesla
250
FACTS meaning
Fuel
Air
Compression
Timing
Spark
251
Contract in which the agreement of the parties is inferred from their
conduct.
Implied contract
252
Main cause of air pollution as a result of combustion of fuel.
carbon dioxide
253
Inorganic refrigerant
r717
254
Amount of heat added or removed measured in change of temperature without changing state
sensible heat
255
determination of the degree of compaction of the soil
Field Density Test (FDT)
256
preparation of the sub-grade, in line and elevation, for application of pavement
materials including base and surfacing materials
grading
257
layer of the specified or selected materials, treated or untreated, of designated
thickness in a pavement structure immediately above the sub-grade and below the
pavement
subbase layer
258
cross slope of the pavement at a horizontal curve, provided to partially counterbalance
the centrifugal force on a vehicle going around that curve.
superelevation
259
embankment height should be BLANK meters than the flood level of the area
0.6m
260
horizontal curve, minimum radius FMR
30m
261
The minimum widening
recommended on curves should be
0.6m
262
The maximum side slope shall be BLANK. Normal slope shall be BLANK.
2:1
4:1
263
is the process of determining the thickness and strength of a
pavement laid on a soil foundation for the purpose of providing an even non-skid,
stable and desirable surface, permitting efficient, rapid and safe flow of traffic in
accordance with specified loads
pavement design
264
1 chain is approximately?
20m
265
1 arrow is approximately?
20m
266
100 links is approx?
20m
267
pila ka meter ang 1 kg of tie wire approx?
53m/kg
268
A silo that has an aspect ratio less than or equal to 0.4 (h/d ≤ 0.4) with a flat bottom
retaining
269
A silo that has an aspect ratio greater than 0.4 and less than or equal to 1 (0.4 < h/d ≤ 1.0). If the silo has an aspect ratio less than or equal to 0.4 (h/d ≤ 0.4) and has a hopper, it is also classified as
squat
270
A silo that has an aspect ratio greater than 1.0 and less than 2.0. (1.0 < h/d < 2.0)
intermediate
271
A silo that has an aspect ratio greater than or equal to 2.0 (h/d ≥ 2.0)
slender
272
