ANESTHESIA MACHINE

Question 1

How to assess a high-pressure leak test?

Answer 1

Close APL and pressure O2 flush. Airway pressure should remain constant

Question 2

How to assess a low-pressure leak test?

Answer 2

attach a bulb to the common gas outlet and create a negative pressure. The bulb should not inflate for 10 seconds or test failed. Check with each vaporizer. checks for negative pressure.

Question 3

what is the PSI and components for high-pressure system?

Answer 3

High pressure 45-2000 PSI

Cylinders Pressure

Question 4

What is the PSI and components for low-pressure system?

Answer 4

Low pressure 15-30 PSI

flow-meter and common gas outlet

Question 5

What is the PSI and components for intermediate pressure system?

Answer 5

35-45 PSI

Oxygen flush valve and pipelines

Question 6

What is the 5 task of oxygen for the anesthesia machine?

Answer 6

O2 flush valve
O2 failure alarm
O2 failure device
Ventilator gas drive
Flowmeter

Question 7

What is PISS?

Answer 7

Pin Index Safety System prevents the use of the wrong gas cylinder, PISS

Question 8

What id DISS?

Answer 8

Diameter Index Safety System prevents the wrong connection of the gas hose.

Question 9

What is the max pressure, volume, and configuration of air?

Answer 9

Air max pressure 1900 PSI
Air max volume 625 L
Pin 1-5

Question 10

What is the max pressure, volume, and configuration of oxygen?

Answer 10

Oxygen max pressure 1900 PSI
Oxygen max volume 660
Oxygen Pin 2-5

Question 11

What is the max pressure, volume, and configuration of nitroeous oxude?

Answer 11

Nitreous OXide 745 PSI
Nitreous Oxide max volume 1590
Nitreous Oxide 3-5

Question 12

Oxygen pressure failure activates when?

Answer 12

FiO2 falls below 20-25. NItreous shuts off at oxygen pressure less than 20PSI. Never leave your cylinder open. Use wall gases. Only use sylinder for backup purposes.

Question 13

Nitreous Mixture to Oxygen Ratio

Answer 13

no more than 3:1