AMT 112 REVIEWER Flashcards
Means an alteration not listed in the aircraft, aircraft engine, or propeller specifications:
(1) that might appreciably affect weight, balance, structural strength, performance, power-plant, operations flight characteristics, or other qualifies affecting airworthiness; or that is not done according to accepted practices.
(2) Major Modification
Means a repair:
(1) that if improperly done might appreciably affect weight, balance, structural strength, performance, power-plant, operations, flight characteristics, or other qualities affecting airworthiness; or that is not done according to accepted practices.
(4) Major repair
requires all persons operating republic of the Philippines registered aircraft to notify the Authority when certain events occur.
CAR Part 5
it is the set of processes by which an aircraft, engine, propeller or part complies with the applicable airworthiness requirements and remains in a condition for safe operation throughout its operating life.
(1) Continuing Airworthiness
Is required to open lines of communication with the state of design and/or the state of manufacture so that the ____ can receive all safety bulletins and airworthiness directives for each type of aircraft operating in the Republic of the Philippines
Authority
A certification confirming that the maintenance work to which it relates has been complied with in accordance with the applicable standards of airworthiness, using approved data.
(3) Maintenance Release
it presents regulatory requirements for the airworthiness of aircraft expected to operate in the Republic of the Philippines using the standards and recommended practices in ICAO Annexes 6 and 8
CAR Part 5
The restoration of an aircraft/aeronautical product using methods, techniques, and practices acceptable to the Authority, including disassembly, cleaning, and inspection as permitted, repair as necessary, and reassembly. and tested in accordance with approved standards and technical data, or in accordance with current standards and technical data acceptable to the Authority.
(6) Overhaul
(a) This regulation prescribes the requirements for-
(1) Certification of aircraft and aeronautical components;
(2) Issuance of Certificate of Airworthiness and other certifications for Aeronautical products;
(3) Continued airworthiness of aircraft and aeronautical components;
(4) Rebuilding and modifications of aircraft and aeronautical components;
(5) Maintenance and preventive maintenance of aircraft and Aeronautical components;
(6) Aircraft inspection requirements; and
(7) Air operator aircraft maintenance and inspection requirements.
5.1 GENERAL
5.1.1.1 APPLICABILITY
Simple or minor preservation operations and the replacement of small standard parts, not involving complex assembly operations
(5) Preventive Maintenance
The restoration of an aircraft/aeronautical product by using methods, techniques, and practices acceptable to the Authority, when it has been disassembled, cleaned, inspected as permitted, repaired as necessary, reassembled, and tested to the same tolerances and limits as a new item, using either new parts or used parts that conform to new part tolerances and limits.
This work will be performed by only the manufacturer or an organization approved by the manufacturer or an organization approved by the manufacturer, and Authorized by the state of registry
(7) Rebuild
A document signed by an authorized representative of an approved maintenance organization (AMO) in respect of an inspection, repair or modification on a complete aircraft, engine or propeller after it has received a Maintenance release for the maintenance performed at an AMO.
(8) Return to Service (RTS)
The contracting state, which approved the original type certificate and any subsequent supplemental type certificates for an aircraft, or which approved the design of an aeronautical product or appliance.
(9) State of Design
The state having jurisdiction over the organization responsible for the final assembly of the aircraft engine or propeller.
(10) State of Manufacture
The contracting state in whose register the aircraft is entered.
(11) State of Registry
