Airborne Weapons Assembly Manual Mk 80/BLU Series General Purpose Bombs , Mk 77 Fire Bombs And Practice Bombs Fleet Maintenance Activities Flashcards
The amount of time or vane revolutions needed for the firing train to be aligned after the bomb is released or from time of release until the bomb is fully armed-also known as safe separation time (SST)
Arming time
A means by which a fuze is physically determined to be in a safe or armed condition
External evidence of arming (EEA)
The time required for a fuze to detonate after impact , or a preset time
Functioning time
The action that causes a fuze to detonate before impact when any substantial object is detected at a predetermined distance from the fuze
Proximity (VT)
The distance along the trajectory that a bomb travel from the releasing aircraft in an unarmed condition
Safe Air Travel (SAT)
When the functioning time of a fuze is 0.0003 seconds or less
Instantaneous
When the functioning time of a fuze is 0.0003 to 0.0005 second
Non delay
When the functioning time of a fuze is longer than 0.0005 second
Delay
Fuzes are divided into what two general classes
Mechanical and Electrical
What fuze is like the hammer and primer used to fire a rifle or pistol
Mechanical
What is used to initiate an electrical fuze
Electrical impulse
If a bomb is accidentally released during landing or takeoff , what prevents the fuze from being able to fully arm and detonate
Delay arming
What is the publication pertains to Airborne bomb and rocket fuzes
NAVAIR 11-1F-2
What publication pertains to aircraft bombs , fuzes , and associated components
NAVAIR 11-5A-17
When is the MK 339 Mod1 installed in cluster bombs
During assembly at the manufacture
Hoe can you visually tell if the MK 339 Mod 1 mechanical time fuze is armed
Green foil is pierced by the red indicator pin
On the MK 339 Mod 1 , if only the option time wire is pulled out on airborne release , what will happen to the fuze
The fuze will dud
What fuze is used with the GBU-24(series) bomb
FMU-143(series) electric tail fuze
The low drag time switch on the FMU-139 should always be in what position
X position
The MK 122 Mod 0 safety switch must be installed in what type of environment
RADHAZ-free environment
What is the classification of the DAU-33 proximity sensor
Confidential
What proximity sensor is an adverse-weather, self powered , active , radio frequency , and single mission device capable of operating in an electronic countermeasures environment
DSU-33 proximity sensor
What proximity fuze is used with the CBU-99 Rockeye and CBU-78 Gator weapons
FMU-140A/B proximity fuze
The MK80(series) GP bombs have approximately what amount of weight is made of explosives
45 percent
What is the explosive filler used in the BLU-110/111/117A/B(series) GP bombs
PBXN-109
What BLU(series) bomb is a low-collateral damage bomb
BLU-126/B (LOCO)
How is the BLU-126 B identified
There is an extra yellow stripe around the aft end of the bomb body
Name two basic nose plugs used in GP bombs
MXU-735/B and MXU-735A/B and the ogive nose plug
What nose plug us used for hard target penetration
MXU-735
What prevents premature or accidental withdrawal of the arming wires from the weapon component
Safety Fahnestock clips or Dexter safety clips
Unless otherwise specified , what safety clips are used vice Fahnestock clips
Dexter safety clips
What is the only alarming wide made of steel
MK3 Mod 0
What is the most frequently used mode for bomb delivery
In flight selection (pilot option) mode
How is the BSU-85/B attached to the bomb body
8 set crews
What are the moveable guidance fins on the computer control group (CCG) better known as
Canards
The heavy-walled case on the GBU-24 pave way III bomb process the penetration capability of how much reinforces concrete
4 to 6 feet
The BLU-109A/B has a thermal protective coating applied to the surface for what reason
Increase cook off time
What are the criteria for missing thermal coating on the BLU-109A/B
Must not be missing more than 20 square inches of thermal coating in a single area or more than 40 square inches total
What general purpose (GP) bomb body is used to make up GBU-12
MK 82
What general purpose (GP) bomb is used to make up GBU-16
MK 83
What general purpose (GP) bomb is used to make up GBU-10
MK 84
What is the weight of the MK 62 mine
500 pounds
What is the weight of the MK 63 mine
1000 pounds
What is the weight of the MK 65 mine
2000 pounds
What conversion kit is used to turn a general purpose (GP) bomb into a mine
MK 130 Mod 0 kit
What section of the MK 7 bomb dispenser is the main structure that contains bombs bomblets
Cargo section
What cuts the MK 7 bomb dispenser in half from front to rear
Two linear-shaped charges secured longitudinally inside the walls
Practice bombs are manufactured as what type of bomb bodies
Solid or cast-metal bodies
What are the two type of practice bombs
Full scale and sub caliber
What practice bomb is much smaller in size and weight than the service bomb simulates
Sub caliber
What practice bombs are representatives of service bombs in their size and weight
Full scale
What are the two subcaliber practice bombs currently in use
MK 76 Mod 5 and BDU-48/B
How much does the MK 76 Mod 5 subcaliber practice bomb weigh
25 pounds
What color are practice bombs
Blue
How is the MK 76 Mod 5 subcaliber bomb shaped
Teardrop shape
How is the aft body of the MK 76 Mod 5 attached to the bomb body
Crimped
How are the tail find of the MK 76 Mod 5 attached
Welded
What type of firing is the MK 76 Mod 5 used for
Impact firing (only)
What firing pin is used in the MK 76 Mod 5 subcaliber practice bomb to initiate the signal cartridge
MK 1 firing pin
What holds the signal cartridge and firing pin in place on the MK 76 Mod 5 subcaliber practice bomb
Cotter pin
What thin cased cylindrical practice bomb is used to simulate retarded weapon deliver
BDU-48/B
How much does the BDU-48/B subcaliber practice bomb weigh
10 pounds
What suspension lug is used with the MK 76 Mod 5 subcaliber practice bomb
MK 14
If the use of a fuze is not desired in full scale practice bombs , what is installed in the tail fuze well to provide visual observation of weapon/target impact
MK 89 Mod 0 bomb spotting charge to permit the use of a practice bomb signal cartridge
How do laser guided bombs detect target
Laser beam illumination
How is the MK 89 Mod 0 spotting charge adapter kept in a safe condition during ground handling
Installation of a safety cotter pin in the safety pin sleeve
What should never be packed or unpacked in a weapon magazine
Fuzes
When detonated , what has a tendency to set off all explosive material that is near it
Bomb ammunition
What type of ammunition cause the most injuries to personnel
Practice bomb
The FMU-143/B tail fuze is used with what weapon
GBU-24B/B
The FMU-139 may be installed and retained in the GP bomb for how long
1 year from the date the fuze was removed from its original container
What is section V(fire) of the Weapons Assembly Manual
Common Procedure
MK 376 fuzes are restricted for what use
Inert use only
What do you see when the FMU-139 is in the safe condition
Red and black is not visible on gag rod sleeve
Is the MK-3 arming wire required with the FMU-139 fuze
No it is not required
If the pop out pin is accidentally pulled out , what do you do
This is okay, push the pin all the way back in so that both holes align , then reinstall the safety pin
If only a tail fuze us being used , what must be installed in the nose
Steel nose plug and support cup(ogive) tighten with spanner wrench
Can a bomb fly with a cracked set screw
Yes only one is acceptable as long as the screws sit in the āVā groove
Fuzes exposed for more than how many days should be disposed of
180 days