ADMINISTRATION Flashcards
What is the difference between Government Furnished materials and Contractor Furnished Materials?
Contractors purchase Contractor furnished materials, Unit purchased Government furnished materials.
How accurate should an estimate for labor hours be?
Plus or minus 10%
How should you estimate for length of a hot work project?
8 linear feet per hour
What is a Statement of Work?
A description of what you want the contractor to do and it serves as a guideline for inspectors and contractors.
MLCANT requires CSMPs shall be prepared and records retained for all cutters _____ feet in length and greater.
65
Cutters shall generate CSMPs within _____.
CMplus
The Fire Marshall reports to who?
The DCA
How many hot workers may be attended by a single fire watch during hot work operations?
Four
What type of chart is frequently used to manage a project?
Gantt
Whose approval must be obtained to start hot work in areas other than specifically designated?
CO or representative
What are two different procedures followed in preparing a government estimate?
Analysis of historical data and detailed cost estimating.
For estimating labor rates during Sunday and holiday work, what factor is used?
2.0
Who is responsible for maintaining a cutter’s CSMP files?
EO/EPO
MLCPAC requires CSMPs shall be prepared for all cutters and boats _____ feet or more in length.
30
How many shingles come in a bundle?
27
How many bundles typically make up a square?
3
In GTAW what is a collet?
A device used to hold an electrode
In GTAW what is a contact tube?
The component on a GMAW gun that transfers the electrical current to the welding filler wire.
What does GMAW stand for?
Gas metal arc welding (commonly MIG)
What does GTAW stand for?
Gas tungsten arc welding (commonly TIG)
What is an IGE?
Independent Government Estimate. The Government’s estimate of resources and cost of resources.
What type of estimate includes a detailed cost breakfdown of the work involved and also has historical data?
Historical maintenance standard estimate
What is the RS Means Manual?
A handy desk reference for writing detailed cost estimates.
In the RS manual, estimates are broken down into what two groups?
Unit Price and Assemblies
Where can a Fire Marshall procure a Fire Marshall inspection report?
locally
What is the most hazardous class of hot work? Why?
Class I– high velocity sparks or slag are produced. (ex. Flame cutting, welding, plasma cutting)
Describe hot work entailed in class II hot work.
Less hazardous work that Class I, flames with minimal energy or slag/sparks that are generally localized (ex. Stud welding, torch blazing, grinding with abrasive disks.)
