ADIS Flashcards
The __________ is the interphone status after a functional change has been completed
Home State
Once you select a function, how much time are you allowed to make an adjustment before the ADIS returns to the home state?
6 seconds
What will cause a BIT to be accomplished?
Applying power, 2-sec power interruption, or pressing the BIT button
What message indicates a successful BIT check?
PASS
What must be your configuration to have this message? COM2 TX
COM 2 MICROPHONE selected and PTT
Which of the IACPs has no backup partner?
Boom operator (fwd position)
When operating in emergency mode, which radio is hardwired to the copilot’s IACP?
COM 2
When operating in emergency mode, which radio is hardwired to the pilot’s IACP?
COM 1
You are at a station other than the boom operator’s and attempt to manually enter the BU mode by a short press of the EMG push button. What does it mean if your IACP shows the message “XSIDE BU” and the EMG push button status indicator blinks for an exit time out period?
Your partner is in the BU mode
How do you activate the BU mode?
Press the EMG button for a short press
What makes the message STUCK KEY appear?
Key stuck for more than 35 seconds
In an airborne digital interphone system, which component integrates all of the signals
Combined Audio Interface Unit (CAIU)
The __________________ permits localized intercom communications between stations within a group.
Local Interphone Control System (LCL ICS)
To initiate normal intercom communications with another operator, which button would each of you press on the interphone audio control panel?
Intercom Control System (ICS)
What do you need to do to select emergency mode from the Interphone Audio Control Panel (IACP)?
Press EMG for a long press