AA Engines Flashcards
On the B757, if required, both engines may be operated conventionally by ____.
manually disengaging the ELC
The primary engine indicators on the B757 are ____.
EPR, N1, EGT
The primary engine indicators on the B767 are ____.
N1, EGT
On the B757, there are 2 engine idle speeds, minimum idle, and approach idle. The ____ selects these idle speeds automatically.
Fuel Control Unit
On the B767, Minimum idle is a lower thrust than approach idle and selected for ground operation and all phases of flight except __________ and ___________.
approach, landing
On the B757, concerning engine idle speeds. Minimum idle is a lower thrust than approach idle and selected for _________ operation and all phases of flight except __________ and ___________.
ground, approach, landing
The B767 has two engine idle speeds, minimum idle and approach idle. The ____ selects these idle speeds automatically.
EEC
Each engine has ____ ignitors. ____ ignitors are always used for in-flight starts.
2, Dual
During start on the B757, the Engine Start Selector automatically moves from GND to AUTO when engine RPM reaches approximately ____ % N3
47
During start on the B767, the Engine Start Selector automatically moves from GND to AUTO when engine RPM reaches ____.
50% N2
If the Standby Engine Indicator Selector is positioned to AUTO, engine parameters are displayed automatically if ____.
EICAS has failed
Engine ignition must be on for ______? For operation with temperatures below 15 degrees C and visible moisture present
takeoff and landing
