9

Question 1

1. What r d 2 primary dev of Ethernet LAN?
2. Thiss?? Determin d desti MAC ADD of a local dev when it knows its IPV4, this has 2 func ( 1. Resolves ipv4 add to MAC ADD, 2. Maintain ARP TABLE of IPV4 to MAC add mapping

Answer 1

1. 1 layer 2 PHYSICAL ADDRESS/ MAC// nic to nic
   1.2 Layer 3 Logical Address/ IP // packet source to desti dev
2. ARP

Question 2

T / F

1. To send a frame, a device will search its ARP table for a destination IPv4 address and a
   corresponding MAC address.
   • If the packet’s destination IPv4 address is on the same network, the device will search
   the ARP table for the destination IPv4 address
2. the destination IPv4 address is on a different network, the device will search the
   ARP table for the IPv4 address of the default gateway.
   • If the device locates the IPv4 address, its corresponding MAC address is used as the
   destination MAC address in the frame.
3. is no ARP table entry is found, then the device sends an ARP reques

Answer 2

T
T
T

Question 3

Basic Configuration
1. Devic name
2. Priv exec
User exec mode

3. User EXEC mode
   4, secure ssh telnet
4. Encrypt plaintext paasword
5. Banner

Answer 3

1. Hostname
2. Enable secret

3, line consoe 0,
Password pass
Login

4. Line vty 0 4
   Pass pass
   Login
   Transport input { ssh| telnet}
5. Service password encryption
6. Banner motd &message&
   End
   Copy run st

Question 4

Command for router interface 4

Answer 4

1.
Interface.giga/fast
Description **
Ip address * *. **
Ipv6 **
No shutdown

Question 5

1. This command activates the interface
   2.to verify int config use the ?? And ?? Command

Answer 5

1. No shutdown
2. Show ip int brief and showbipv6 int brief

Question 6

1. A switch must have a ?? That config to remotelu manage the switch from another network
2. To config ipv4 defaukt gate way sa switch use the command —?? — ip address global config comman

Answer 6

1. Defaukt gateway
2. Ip defaukt-gateway