8.2s KNOW CONSTRUCTION MATERIALS & THEIR PROPERTIES Flashcards

1
Q

S1 - EFFECTIVE STRUCTURAL BUILDING MATERIALS COMPRISE OF

A
  • Stiffness w Elasticity

* Resist Dimensional Instability due to Humidity & Temp.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

S2 - QUALITIES OF WOOD AS A STRUCTURAL MATERIAL

A

• SMALL • RENEWABLE • FLEXIBLE
• LIGHT • EXPOSED TIMBER
* GOOD IN COMPRESSION & TENSION

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

S3 - QUALITIES OF CONCRETE AS A STRUCTURAL MATERIAL

A

• FREEDOM OF FORM • NATURALLY FIRE PROTECTED
• EXPOSED STRUCTURE • INEXPENSIVE
* GOOD IN COMPRESSION - MUST BE PAIRED WITH STEEL REINFORCING FOR TENSION

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

S4 - QUALITIES OF STEEL AS A STRUCTURAL MATERIAL

A
  • REPETITIOUS MODULAR • LONG SPANS

* LIGHT • STIFF & ELASTIC

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

S5 - WHAT IS CONCRETE MIX COMPRISED OF?

A

+ CEMENT (PORTLAND)
+ WATER
+AGGREGATE

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

S6 - WHAT KIND OF CEMENT IS PORTLAND CEMENT AND HOW IS IT MADE

A

• HYDRAULIC CEMENT
1 - BURN CLAY & LIMESTONE IN A KILN
2 - PULVERIZE INTO FINE POWDER

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

S7 - 5 TYPES OF CONCRETE

A
TYPE I - NORMAL
TYPE II - MODERATE PORT. CEMENT 
TYPE III - CURES FASTER (COLD WEATHER)
TYPE IV - LOW HEAT
TYPE V - SULFATE RESISTANCE (salty acidic soil)
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

S9 - CONCRETE MIX CONTAINS __-__% AGGREGATE.

A

60-80%

THIS IS KEY TO •FR •STRENGTH •WEIGHT

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

S10 - SIZE OF FINE & COARSE AGGREGATE. WHAT IS APPROPRIATE DEPTH & THICKNESS FOR SLAB & WALLS RESPECTIVELY?

A
FINE: 
sand < 6mm
COARSE: (Abram's Law)
must be <1/3 slab depth
must be <1/2 wall thickness
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

S11 - RELATIONSHIP OF WATER-CEMENT RATIO TO STRENGTH + IDEAL RANGE:

A
  • Compressive strength inversely proportional to ratio of water to cement.
  • IDEAL RANGE .45-.60
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

S12 - LIGHTWEIGHT CONCRETE MADE WITH _______ OR ___________.

A

EXPANDED SHALE OR SLATE AGGREGATE

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

S13 - INSULATING CONCRETE MADE WITH _________

A

PERLITE AGGREGATE OR FOAM AGENT.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

S14 - Describe the advantages of WOOD as a structural material. (6)

A
\+ strong
\+ durable
\+ light
\+ rigid &amp; flexible
\+ easy to work w
\+ renewable
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

S15 - What are the 2 major classes of wood?

A
*do NOT describe hardness
1 - SOFTWOOD = used for construction
  • predominantly evergreen
  • pine/fir
2 - HARDWOOD = used for finishing
  • predom. broad leaf flowering trees
  • Cherry/Oak/Maple
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

S16 Wood is great in tension and compression, but the grain should be considered. Describe the strength of wood cut:
1 - Parallel to the grain
2 - Perpendicular to the grain

A

1 - Parallel = BEST for tension and compression
(1/3 stronger in compression)
2 - Perp = best for shear strength
(allowable force = 1/5-1/2 that of parallel)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

S17 What is impacted by the cut of a log? (4)

A

1 - strength
2 - insulative value
3 - expansion/contraction
4 - how it is joined

17
Q

S18 What are the 2 main types of log cutting?

A
1 - PLAINSAW $
  • varied grain / twisting 
2 - QUARTER SAW \$\$$ 
(aka vertical grain)
  • better quality
18
Q

S19 Why do we season wood?

A

To season wood is to dry in a kiln to:
1 - reduce moisture
(shrinking <30%
2 - protect against decay (shrinking <20%)

19
Q

S20 What are common lengths for lumber.

A

in 2’ increments:

6’ (1830) - 24’(7315)

20
Q

S21 What are these 2 types of lumber:
1 - yard lumber
2 - factory + shop lumber (4 purposes)

A

1 - yard lumber
• sawn/selected for further manufacture
• ie. doors/millwork
• graded according to useable wood

2 - factory + shop lumber
• softwood lumber for general building purposes inc:
• boards (<2” thick)
• dimensional lumber (joists/light frame)
• structural lumber (beams/stringers)
• timbers (typ. left in green undressed condition)

21
Q

S22 What is a good rule of thumb when estimating depth for beams and girders.

A

Beam span/20

Girder span/15

22
Q

S23 What is more structurally efficient an S(often called I) beam or a W beam

A

A W beam is a profile engineered to carry the load more efficiently.

23
Q

S24 Describe the 3 types of metal structural connections.

A

1 - MOMENT (this sh*t is locked down)
• rigid frame
• connections hold original angle under loading of welded plates
2 - SHEAR
• simple frame
• connections resist shear loads only .: can rotate
3 - SEMI-RIGID
• semi-rigid frame
• assume limited but known moment resistance capacity

24
Q

S25 What are the 2 basic types of steel?

A
1 - Structural Steel
  • hot rolled
  • strong
  • versatile (1 storey up to towers)
2 - Lightweight Steel
  • details sim. to wood frame
  • low rise
  • on-site erection = good for irregular shapes
25
Q

S26 What are the 2 types of open web steel joists?

A
STANDARD (K series )
  • zigzag = single bent bar
  • span =  4 - 18m
  • depth 100-150mm 
LONGSPAN (LH &amp; DLH series)
  • heavier web/chord members
  • great for heavier loads + longer spans
  • span = 8 - 18m   (DLH can span up to 144')
  • depth = 150-305mm 

**compare:
24K9 = acceptable span 7-14m
24LH7 = acceptable span 11-14m
note: chord is larger on K series

26
Q

S27 How would you read the sizing for an open-web joist? example: 24K9

A

24K9

24” Depth of joist
K Joist series
9 Chord designation

27
Q

S28 Good rule of thumb for estimating open web steel joists.

A

SPAN should not exceed 24xs the JOIST DEPTH.

28
Q

S29 What size of overhang is acceptable for the K open web joist series?

A

5’6” with an allowable load of 300 psf

29
Q

S30 What must be done is metal decking is acting as a diaphragm, transferring lateral loads to shear walls.

A

MUST be welded to steel supports along entire perimeter.

30
Q

S31 Describe 3 most commonly used metal decking types.

A

FORM DECKING
• perm. formwork for reinforced conc. slab
COMPOSITE DECKING
• serves as tensile reinforcement for con. slab to which it is bonded with it’s ribs
CELLULAR DECKING
• weld flat sheet to underside of corrugated
=raceways for elec. + comms
* may also serve as acoustic ceiling if perf. flat sheet filled w glass fiber.

31
Q

S32 What are the advantages (3) and disadvantage of using lightgauge steel joists?

A

+ lighter/longer spans + more dim. stable than wood
+ easily cut/tooled onsite
+ prepunched holes for bridging/piping/wiring
- they conduct more heat than wood and have more embedded energy

32
Q

S33 What is a good rule of thumb for estimating solid wood beam sizing? And glulam?

A

Wood depth = span/15

Glulam depth = span/20

33
Q

S34 If gypsum is used as a corner brace what 2 addition installation measures must be taken?

A

1 - must be nailed to stud base

2 - adhesive used

34
Q

S35 List 3 types of wood columns:

A

• SOLID
• BUILT UP - glue-lam or mech fast.
(cannot take as much load as same size solid)
• SPACED

35
Q

S36 What are the 2 most common modular block types for structural masonry walls?

A

1 - Bricks = heat hardened

2 - Blocks (concrete) = chemically hardened

36
Q
S37 Mortar is a mix of cement and/or lime w water and sand. What makes each of these unique:
1 - Cement Mortar
2 - Lime Mortar
3 - Cement/Lime Mortar
4 - Masonry Cement
A
1 - Cement Mortar
  • portland cement
  • water
  • sand
2 - Lime Mortar
rarely used
3 - Cement/Lime Mortar
  •cement mortar + lime 
  = increased plasticity and water retention
4 - Masonry Cement
  • proprietary mix of port.cement w lime and plasticizers
  = rqr only the addition of sand and water
37
Q

S38 List the 5 types of mortar. (based on strength)

A

M - high strength
• use: reinforced masonry below grade or in contact w earth

S - med - high strength
• use:bond lat. strength more import than comp.

N - med strength
• use: above grade where high lat./comp. strength NOT rqrd

O - Low strength
• use: int. non-LB partitions

K - Very low strength
• use: int. non-LB partitions

38
Q

S39 What are form ties? List 2 types

A

SNAP TIES
- have notches or crimps so they can be snapped off after forms are removed
SHE BOLTS
- waler rods (reused) threaded into inner rod which is left in concrete

39
Q

S40 List the 3 most common precast concrete wall types

A

SOLID - 8’ width typ.
(max height 7m)

COMPOSITE - Rigid Foam @ center
(max height = 7m)

RIBBED - max rib depth 305mm
(max height = 14m)